This is topic Fox Mustang Performance parts in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=085130

Posted by whiplash-smile (Member # 10468) on :
 
Clearing out the garage of old performance Fox Mustang parts – most parts have very low miles on them or are new, I will negotiate the price dependant on the number of items purchased.

70mm Mustang Mass airflow sensor calibrated for 19 pound injectors, with Intake tube and K&N air filter – 80.00

matching Fuel rail with Holley Adjustable FPR fuel pressure regulator and New 19# 4 port injectors nice smog legal bump in power – 80.00

BBK GRIPP Caster Camber plates – these are fairly old and the powder coat is peeling but they come with a complete unopened rebuild kit for the pair. – 80.00

I have a set of D8OE 351w heads that have been Ported heavily on the exhaust side(Hump and all restrictions removed ) and milled for higher compression - they have 1.94 intake and 1.50 exhaust valves, Competition cams guide plates and hardened pushrods with ARP 3/8" studs, PRW 1.7 roller rockers and new Viton seals. These heads are now right at 65cc chambers if I remember right - they DO have the bigger intake runners from the factory - for reference the intake does not appear to be ported and still was larger than GT40p's. I was told by the head shop that if milled these heads have great "quench" and can be milled to 9.0-9.5 - good for boost and nitrous. I went to Aluminum.
complete and ready to run with correct height hardened pushrods
You can even have the Felpro intake/head gaskets and copper exhaust gaskets used - but they never had fluids on them or wwas the motor run. If you mount these to a 302/5.0 you should buy the ARP washers/bolts that let you mount them to a 302 – 280.00

Zex Dry kit complete with all needed parts and lines to mount and run with 50/75/100/125/150 hp jets. With an adjustable F.P.R.(FPR really not needed below 100hp) this system is incredibly flexible and EASY to setup and operates off W.O.T. sensor and bottle pressure - very safe and never had an issue with this system, but I have added a supercharger recently and while this system with compensate and handle boost, I am afraid my mostly stock block will not. Fast hookup with full factory instructions and a full bottle. Bottle has a pressure guage - 280.00

Ford Racing FRONT Lower Control Arms (LCA’s) that are like new, FMS put in stiffer rubber bushings with the new Teflon low friction balljoints - opened up and mounted, but I went with coil overs and a tubular instead. – 180.00

Tokico Blues Struts and Shocks with Eibach Pro Lowering Springs -1.5” in the rear, 1.75” in the front on a V8 – less than a thousand miles on them. - 280.00

Ram Aluminum Flywheel, Ram Stage 2.5 clutch disc and Ram pressure plate – T-5 10 spline with 1,200 miles on it – 300.00

Convertible Style Bar / Roll bar it has seen better days as it sits but I have new marine grade vinyl to repair it with or just use it as is. – 125.00

Michelin Pilot 235/45/17’s X2 and BFG G Sport tires 225/45/17 X2 50% tread – 100.00

I am willing to trade for Maximum Motorsports parts.
408-628-2716


ford mustang FRPP FMS highway 5.0 50 fifty fox SVO SVT pony gt lx highway coupe hatchback convertible Nitrous NOS ZEX notch notchback fastback saleen roush shelby gt40 cobra motorsport steeda bbk chp 302 289 351 windsor msd mallory mac kyb edelbrock trick flow racing autocross police interceptor ssp mach svt tremec tko borg warner borg-warner hurst
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com