This is topic Quicktime Bellhousing 302/351 in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=070836

---

Posted by Paul Gwizdak (Member # 7936) on :
 
I have a Quicktime Bellhousing for a 302/351. I used this for 5000 miles before changing my setup.

$300.00

Paul
925-876-5757


 

---

Posted by forced331 (Member # 1270) on :
 
Do you have the P/N? Will this fit a Tremec 3550? Also is this SFI aprroved?

Thanks
 

---

Posted by Duncan Motors (Member # 7045) on :
 
thats a nice peice
 

---

Posted by phildog (Member # 1214) on :
 
Not SFI approved without bolts all the way around the bottom, on 2 3/4" centers. Not really necessary to save your feet, but required for SFI certification. I have both versions, and the quality it really nice. Far superior to any other scattershield that I have seen.
 

---

Posted by Duncan Motors (Member # 7045) on :
 
is this the one that the starter can bolt on backwards
 

---

Posted by phildog (Member # 1214) on :
 
No, but it sure makes it easy to check for ring gear wear. Quicktime strives to make them as light as possible, so they eliminated the steel around the back of the starter.

The other advantage of the Quicktimes is that they don't need to be dialed in with offset dowels to the c/l of the crank. Roush ships their crate motors with the Quicktimes, and says not to bother with aligning them to the block.
 

---

Posted by Paul Gwizdak (Member # 7936) on :
 

quote:

---

Originally posted by forced331:
Do you have the P/N? Will this fit a Tremec 3550? Also is this SFI aprroved?

Thanks

---