This is topic WTT: vortech 8'' crank pulley for a 7'' in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=069375
Posted by fastertoys1 (Member # 5270) on
:
im looking to lower the boost on my coupe, so im looking to trade my 8'' vortech (8rib) crank pulley for a 7'' or maybe even a 6'' (must be 8rib)
maybe we can even trade belts if we have to.
also looking for a 3.33 (or larger) vortech head unit pulley
thanks
Posted by Vortech Saleen (Member # 7494) on
:
Where are you located. I have a 3.33 and a stock 8 rib pulley 6.87" diameter.
What blower are you running and what boost are you seeing with the 8"
Aaron
Posted by fastertoys1 (Member # 5270) on
:
with a 3.33 and 8'' crank im seeing 14#
a bit much for me so id like to lower a bit
Posted by 166 Merlot (Member # 1549) on
:
i have a stock s-trim crank pulley if that's what you're looking for, might even have a belt for you too lmk
[ August 26, 2009, 01:30 AM: Message edited by: 166 Merlot ]
Posted by fastertoys1 (Member # 5270) on
:
still looking for a trade
Posted by fastertoys1 (Member # 5270) on
:
still looking
Posted by fastertoys1 (Member # 5270) on
:
ttt
Posted by stangin' (Member # 514) on
:
i have a novi 1000 that came with a 6.87" crank pulley. i upgraded to a vortech 8" crank pulley so i know they are interchangeable.
if you're interested, i'll do a straight up trade, my 6.87" crank for your 8" crank. it's an 8-rib pulley. if for some reason it does not work, we can trade back again. PM me, lmk.
[ September 07, 2009, 05:27 AM: Message edited by: stangin' ]
Fueled by Ford Mustang Owners
on CaliforniaFords.com