PARTING OUT My 10 second N/A 347 combo - Northern California Ford Owners

This is topic PARTING OUT My 10 second N/A 347 combo in forum FOR(D) SALE: at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=067798

Posted by Yellow94GT (Member # 431) on :

*PM me anything your interest in getting pricing on*

Well, the time has come to change up the combo. So up for sale is everything that has to do with a pushrod style motor from my yellow 94 GT. I think a lot of you have seen it around over the years and know what it runs, what it looks like and the power it makes. For those of you that don't, the car is an N/A EFI pump gas friendly 347 that has made 466 RWHP and 428 RWTQ SAE and has gone a best of 10.69 @ 127 MPH in my street trim 94.

I have not removed anything from the car yet, but will be shortly. I would like to sell everything as a package deal if possible. Which will include almost everything to just install this motor/front suspension/exhaust combo into a fox/sn95 platform and go run 10's. Everything from the chip and MAF to the K member and coilovers. The reason I would like to sell everything as a package is that this setup has a beautiful set of $2500 custom stainless step headers with merge collectors that is fit to only this application, (8.2 deck block with Griggs chromoly K member). I would really hate to see these go to waist, but if it happens then so be it. I will sell things in pieces eventually, but the motor must be sold first.

I'm sure I'll be forgeting a lot of the stuff I have into the car that I'll be remembering while removing things, so I'll have to keep updating this post. Here is what I can remember off hand;

The Motor

Production 5.0L roller block, .030 over (new when motor was built)
Eagle cast steel crankshaft
Eagle SIR connecting rods
CP custom pistons 11.1:1 with current setup
Custom metric low tension oil ring package
Clevite 77 bearings
ARP head and main studs
Blueprinted Standard volume/standard pressure oil pump
ARP oil pump driveshaft
Milodon deep pan with windage screen and braided stainless tip stick setup
Billet steel main girdle
Romac Balancer
Cometic MLS head gaskets
Victor Jr. cylinder heads with lots of custom port work and upgraded valves
Comp cams 917 valve springs with titanium ratainers
Victor 5.0 intake manifold again with costom port work
Accufab 80mm Race throttle body with race egr delete plate
HiTech custom camshaft
Rollmaster Billet timing set
Sherman Racing modified hydro lifters
Custom 3/8 pushrods
Comp. Cams HiTech stainless rockers, 1.73 ratio
ARP 7/16 rocker studs
Comp. Cams rocker girdles
Costom fabricated valve covers with 3 breathers, (clear 94/95 alt. location)
Custom Moroso oil baffles
Stock 94/95 fuel rails with 42# injectors and Kirban AFPR
Custom 4 inch CAI, (requires cuting for fitment)
Pro M 88mm MAF for 42# injectors
Mezier electic water pump, (polished)
Poly motor mounts
Polished accessory brackets
Polished 200 amp alternator
Stock style distributor with blue printed polymer gear
Taylor 409 race spark plug wires
Custom SCT Chip

The Front Suspension

Griggs Racing tubular k member and a arms for 94/95 car, (can be run on other cars, but wheel offset will change or you can get the Griggs a arms for your app.)
Strange 10 way adjustable struts
Strange coil over kit with 175 rate springs

The Exhaust

Custom built stainless 1 3/4 to 1 7/8 step headers with 3 inch merge collectors, (cost $2500 to have made and are built for this app.)
Bassani o/r 3 inch x pipe
Bassani 3 inch race cat back modified to go under rear axle for ARB clearance

The car has been in a few magazines with this setup, the most recent one being the September 2007 edition of MM&FF. I dont have many recent pics of the setup, but will be taking several as soon as I pull the motor out and re-clean/polish everything up. I also will disassemble the motor, inspect everything and install new bearings if buyer request.

Asking price for everything is $8500 and $6500 for the motor alone. Once again I'm not willing to part out anything until at least the motor is sold.

I will be out of town from July 2nd to the 6th so if you would like to give me a call at 916-275-8212 please leave a message or you can send me a PM and I'll respond to you on the 6th.

Drew

AED

[ July 20, 2009, 01:15 PM: Message edited by: Yellow94GT ]

Posted by WickedStang (Member # 7692) on :

Sucks its going! Can u tell us what ur new combo is gonna be?

Posted by Notch1320 (Member # 2647) on :

Damn Drew! That combo would be killer in my Coupe!!! Best of luck with the sale. If I wasn't trying the this class racing deal, I would be all over it. That motor in a 2700lbs Fox coupe, with my clutch and trans would be a blast to drive. Someone will end up with a proven killer combo...and at a damn good price!!!

What are you up to next???

Posted by 707vibrantcobra93 (Member # 4702) on :

Do I smell a modular motor cooking? Possibly a setup similar to you wifes? Or maybe a 4 valve, I guess we will see in time to come. Good luck on the sale. Somebody is gonna have the ride of there life with that thing. TTT

Posted by turbo50 (Member # 6700) on :

Only way I would sell that was to go mod motor or chevy LS.........which I am sure you are doing one of either.

Good luck.

I know it is a lowball but I have someone interested in the motor alone for $4500

Posted by 8stang8 (Member # 8082) on :

quote:
Originally posted by Yellow94GT:
I also will disassemble the motor, inspect everything and install new bearings if buyer request.

Real GOOD deal if this is done w/o charge!

Posted by 707vibrantcobra93 (Member # 4702) on :

Hey Drew, Shuan told me about the new setup. Holy crap man that thing is gonna be sick, dare I say another mag feature. I don't wanna spill the beans cuz I don't know If it's secret but that is gonna be wild and can't wait to see it.

Posted by Luke87GT (Member # 21) on :

This is a motor that's worth the dough if I've ever seen one.

And Drew is getting rid of the Griggs K, so I think its safe to say the next motor will be modular... [Wink]

Posted by SPTVENM (Member # 7080) on :

Hey Drew, wanna sell me ur electric water pump? lol i know u wont part but worth a shot [Big Grin]

if u can though can u please pm me the part number for the one that u have or the one i need for my car. thanks [patriot]

[ July 06, 2009, 04:41 PM: Message edited by: SPTVENM ]

Posted by Yellow94GT (Member # 431) on :

PM's replied to.

TTT

Posted by jmcclesk (Member # 1355) on :

Please somebody buy this. Just the though of that engine in my black coupe is giving me wood. [Eek!]

Posted by Yellow94GT (Member # 431) on :

TTT

Posted by Yellow94GT (Member # 431) on :

10.79 on 18's with this combo in an SN!!!!

Posted by Yellow94GT (Member # 431) on :

TTT

Posted by Yellow94GT (Member # 431) on :

Knowbody is stepping up to buy complete, so its coming apart. Let me know what you want.

[ July 20, 2009, 01:17 PM: Message edited by: Yellow94GT ]

Posted by 70mach351 (Member # 7528) on :

are the valve springs and retainers off erics old car? If so I need them if they will work with my set up talked to shawn awhile back, car is running needs a few fuel clamps and a tune, let me know if we can work something out.

Steve

916 293 2267

Posted by jmcclesk (Member # 1355) on :

PLEASE PLEASE somebody buy this set up before i do something stupid. [patriot]

Posted by 2stang (Member # 4237) on :

Are the valve covers tall or short?

Posted by HaulinAss Motorsports (Member # 541) on :

pm sent

Fueled by Ford Mustang Owners
on CaliforniaFords.com