This is topic 385w forged shortblock, ported vic jr's, valve train in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=046688
Posted by 66 AC COBRA (Member # 904) on :
 
71 351w block punched to a 385w by kuntz racing, all the best machine work done, torque plate honed, align bored, equal decked, chamfered oil drain holes and partially deburred block, oil risers, etc
eagle forged crank and rods, custom je -16cc dished pistons, clevite race bearings, rings gapped for blower application, 8qt canton pan, dss main girdle with arp main studs and head studs, blueprinted race oil pump and arp hardened oil drive shaft $2300

edlebrock victor jr heads stage 1 cnc by foxlake, makes 9:1 compression with above shortblock with he 70cc chamber option, I changed the stock vlaves seals to a much better set of viton seals, 0 miles since the seals were done $1250

comp cams nx282hr cam $175
crane link bar hydro lifters $240
tfs hardened pushrods $50
comp pro magnum rockers with arp poly locks $150

shortblock has 500 break in miles plus 5 dyno runs and 5 track passes
everything else only has 5 dyno runs and 5 track passes
 
Posted by SlowStockFox (Member # 1081) on :
 
what up man..... so what did it make for power.... ,im building something like it. how fast did it go at the track.
 
Posted by 66 AC COBRA (Member # 904) on :
 
quote:
Originally posted by SlowStockFox:
what up man..... so what did it make for power.... ,im building something like it. how fast did it go at the track.
never got to make any clean passes, had some other issues [Frown]
 
Posted by 66 AC COBRA (Member # 904) on :
 
ttt
 
Posted by WeSTBaY5.0 (Member # 5899) on :
 
Probably a dumb question but, can the block be run with fuel injection system rather than carb???

[ March 18, 2007, 08:20 PM: Message edited by: WeSTBaY5.0 ]
 
Posted by 66 AC COBRA (Member # 904) on :
 
quote:
Originally posted by WeSTBaY5.0:
Probably a dumb question but, can the block be run with fuel injection system rather than carb???
yes that is the mtoor from my 93 cobra that had the ys-trim on it
 
Posted by GOT 50 (Member # 1960) on :
 
Flow numbers on heads
 
Posted by 66 AC COBRA (Member # 904) on :
 
http://www.foxlakeracing.com/index.php?submenu=Cylinder_Heads&src=gendocs&link=Edelbrock%20Victor%20Jr%20Heads
 
Posted by 66 AC COBRA (Member # 904) on :
 
[patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com