This is topic Heavily Ported GT40 lower intake manifold in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=044913

---

Posted by SydeWayzSix (Member # 3596) on :
 
I have a heavily ported Gt40 lower intake manifold that was off a 500+ hp Mustang. This was on the Notch that I had and was overkill for the setup that I had. I was told that the port-work cost over $500!! I no longer have need for it anymore, so I need to clear it from the garage. I am looking to get $200.
 

---

Posted by Yung Than (Member # 728) on :
 
Are the #1 and #5 port runners cut and welded? If so I have a guy that might be interested...

 

---

Posted by dlas8 (Member # 4198) on :
 
check your pms
 

---

Posted by SydeWayzSix (Member # 3596) on :
 
No, nothing has been cut and welded. The ports are just larger and polished.
 

---

Posted by SydeWayzSix (Member # 3596) on :
 
TTT...
 

---

Posted by SydeWayzSix (Member # 3596) on :
 
TTT
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com