This is topic WTB: Intake manifold pcv baffle(help) in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=043939

---

Posted by BlueBeast88.306 (Member # 6360) on :
 
As you can tell from the subject heading I am in need of one, and the pins. Please help me out.
Thank you,
Justin
925-595-3317
 

---

Posted by HaulinAssMaro (Member # 541) on :
 
Any auto parts store will have that.You can find it either from Help or Dorman Products
 

---

Posted by BlueBeast88.306 (Member # 6360) on :
 
Thank you, I'll check that out. Is the distance between the holes the same on a stock and performer 5.0 manifold?
Thanks again,
Justin
 

---

Posted by BlueBeast88.306 (Member # 6360) on :
 
I went to Kragen, they did not have it. I don't know where to find one.
 

---

Posted by HaulinAssMaro (Member # 541) on :
 

quote:

---

Originally posted by BlueBeast88.306:
I went to Kragen, they did not have it. I don't know where to find one.

---

Kragens does have it.You have to go to the section wiht all the little odds and ends,nut,bolts,door handles,oil pan plugs,you get the idea.Usually they are in an orange package with either the dorman or help brand name on them.if not go to the junkyard and get one

[ November 11, 2006, 12:16 AM: Message edited by: HaulinAssMaro ]
 

---

Posted by BlueBeast88.306 (Member # 6360) on :
 
Okay, I will check the one by my house. You do know I'm talking about the sheet metal baffle that attaches to bottom of the lower intake not the grommet?

Thanks again,
Justin
925-595-3317
 

---

Posted by kingmoochr (Member # 5834) on :
 
kragen wont have that, jy it up
 

---

Posted by AJBlackGT (Member # 3936) on :
 
Or buy a piece of aluminum and a couple botls and make one...
 

---

Posted by BlueBeast88.306 (Member # 6360) on :
 
Yeah, I've considered that option. I not pulling that thing off right now though. I've decided to run the catch can for now and I'll remove it when I have the part and am ready to port the intake.

Thank you,
Justin
 

---

Posted by HaulinAssMaro (Member # 541) on :
 


[ November 12, 2006, 03:29 AM: Message edited by: HaulinAssMaro ]
 

---

Posted by HaulinAssMaro (Member # 541) on :
 

quote:

---

Originally posted by BlueBeast88.306:
Okay, I will check the one by my house. You do know I'm talking about the sheet metal baffle that attaches to bottom of the lower intake not the grommet?

Thanks again,
Justin
925-595-3317

---