This is topic GT40 heads w/rockers and Custom Comp Cam in forum FOR(D) SALE: at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=043665
Posted by Dag302 (Member # 4682) on
:
GT40 Heads
Hot tanked, beaded, magged and resurfaced 3000 miles ago by Gromm Racing Heads in San Jose
At that time they received:
New Valves with valve job
Comp Cam Springs
Pocket port and chamber re-work
Intake port matched to Fel-Pro 1250
Manley Retainers and locks
Heads are complete and ready to bolt on
Cobra 1.72 Rockers
$400 heads
Custom ground Comp cam
516 lift with 1.72 rockers
218 duration @ .050 intake
224 duration @ .050 exhaust
114 lobe seperation
$100
Selling complete off 93 Cobra. Nothing wrong with anything just upgrading to a new top end. Have receipts from Gromm Racing to prove work.
[ November 03, 2006, 12:17 AM: Message edited by: Dag302 ]
Posted by two-gun kid (Member # 5891) on
:
how much for the heads is you decide to part them out.
Posted by Dag302 (Member # 4682) on
:
with or without rockers?
400 without
450 with
Posted by two-gun kid (Member # 5891) on
:
quote:
Originally posted by Dag302:
with or without rockers?
400 without
450 with
hmmmm, let me talk to my friend and see what he wants to do.
Posted by Dag302 (Member # 4682) on
:
I guess I will break it down since I have had quite a few responses.
Heads (no rockers) 400
Heads (with rockers) 450
Intake (with throttle body) 350
93 Cobra Valve covers 50
Custom Cam 100
Posted by Dag302 (Member # 4682) on
:
ttt
Posted by Dag302 (Member # 4682) on
:
make offers
Posted by Dag302 (Member # 4682) on
:
ttt
Posted by Dag302 (Member # 4682) on
:
ttt
Posted by svt306snake (Member # 1967) on
:
great prices for great stuff
Posted by Dag302 (Member # 4682) on
:
sold intake and tb
Posted by WESTsacFIFTYS (Member # 7048) on
:
WILL THOSE HEADS WORK WITH A HYDRAULIC CAM? THERS A HYDRUALIC CAM IN MY 306 SITTING ON AN ENGINE STAND. THE SHORT BLOCK WAS SET UP FOR HYDRAULIC CAM SO I CANT USE HEADS FROM 87-93 LIKE YOURS, IF I GOT A ROLLER CAM, WOULD I BE ABLE TO USE THOSE HEADS WITH NO PROBLEM?
Posted by WESTsacFIFTYS (Member # 7048) on
:
ALOT OF TIMES I CANT FIND THE POSTING AGAIN SO I CAN SEE A RESPONE, PLEEEEEASE RESPOND TO MY EMAIL WESTSACRAMENTOPEEP@SBCGLOBAL.NET K THNX
Posted by asskickn88 (Member # 4957) on
:
quote:
Originally posted by WESTsacFIFTYS:
WILL THOSE HEADS WORK WITH A HYDRAULIC CAM? THERS A HYDRUALIC CAM IN MY 306 SITTING ON AN ENGINE STAND. THE SHORT BLOCK WAS SET UP FOR HYDRAULIC CAM SO I CANT USE HEADS FROM 87-93 LIKE YOURS, IF I GOT A ROLLER CAM, WOULD I BE ABLE TO USE THOSE HEADS WITH NO PROBLEM?
These heads will work fine with a hydraulic cam.
Posted by Dag302 (Member # 4682) on
:
ttt
Posted by WESTsacFIFTYS (Member # 7048) on
:
TRADES OR PARTIAL TRADES? ANYTHING YOU NEED? HEADS, UPPER AND LOWER,?
Posted by WESTsacFIFTYS (Member # 7048) on
:
YOOOO DAG.... WILL YOU TRADE FOR UPER AND LOWER TRICK FLOW TRACK HEAT SET UP WITH SPACER KIT? OR GT40P HEADS?
Posted by Dag302 (Member # 4682) on
:
sorry, I do not need heads or a intake.
Posted by Dag302 (Member # 4682) on
:
SOLD
Fueled by Ford Mustang Owners
on CaliforniaFords.com