This is topic Qa1 K-Member for 4.6 cheap in forum FOR(D) SALE: at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=042585
Posted by J's DDLY SNK (Member # 2016) on :
 
Trying to sell as set both the K-member and the spring perches so that you can use your stock spring and not needing coilover conversion.

$200 For Both NEW PRICE
Jose


-

[ February 18, 2007, 07:50 PM: Message edited by: J's DDLY SNK ]
 
Posted by J's DDLY SNK (Member # 2016) on :
 
TTT
 
Posted by POSBTR (Member # 714) on :
 
Question? Why is your price more then a brand new one? [Confused]
 
Posted by J's DDLY SNK (Member # 2016) on :
 
New K-member from Summit $248 delivered
New Perches from Summit $26 each total $52
Total $300

I am asking $260 because both the K-member and the perches are brand new. The K-member was actually fitted on the car but never driven on. The paint chiping you see on the ends where the perches connect to is from the time it was fitted on car. I was running out of time and money and needed to smog the car soon. So ran out of time to finish the project and I am too lazy to do the swap again.

The price is not firm, that is what I am asking...
 
Posted by J's DDLY SNK (Member # 2016) on :
 
TTT again
 
Posted by 50 Deep (Member # 6216) on :
 
Im interested. just got a couple questions whats involved in the install? its all bolt on right or did you have to make modifications or buy other parts? and once it was installed and the car was on the ground did you notice any change in the wheel stance?
 
Posted by J's DDLY SNK (Member # 2016) on :
 
It is all bolt on. The only mod needed is to grind down the A-arms about a 1/4 -3/8 of an inch off of the slots that bolt up to the K-member. The car was never brought down. I installed the k-member while the car was still on jacks. Never even installed the a-arms. Ran out of time and money to finish the job. The differences noticed was a whole lot more clearance to work underneath the car and that this K-member is significantely lighter than the stock one.
 
Posted by just2sick (Member # 6679) on :
 
250 and ill come pick it up!..lemme know!

-colton
 
Posted by Jmir018 (Member # 1414) on :
 
quote:
Originally posted by J's DDLY SNK:
It is all bolt on. The only mod needed is to grind down the A-arms about a 1/4 -3/8 of an inch off of the slots that bolt up to the K-member. The car was never brought down. I installed the k-member while the car was still on jacks. Never even installed the a-arms. Ran out of time and money to finish the job. The differences noticed was a whole lot more clearance to work underneath the car and that this K-member is significantely lighter than the stock one.
How far forward did it move your front tires? were you able to put your tires back on?
 
Posted by J's DDLY SNK (Member # 2016) on :
 
I never got the chance to place the tires back on. I did do a research before I bought it and the people who had it installed did not see much movement. Check out Corral.net and Stangnet.com, there is a lot of 4.6 owners that did this install.
 
Posted by J's DDLY SNK (Member # 2016) on :
 
To the top!
 
Posted by J's DDLY SNK (Member # 2016) on :
 
make offer, need to clean out garage...
 
Posted by J's DDLY SNK (Member # 2016) on :
 
back TTT!
 
Posted by r3dn3ck (Member # 3192) on :
 
bottom dollar for the k-member? I have cash and work in sunnyvale. LMK. cburnss at gmail dot com
 
Posted by J's DDLY SNK (Member # 2016) on :
 
$220 takes it guys! Need to clean out garage!
 
Posted by J's DDLY SNK (Member # 2016) on :
 
Started to do some early spring cleaning and these are still in the garage.
NEW PRICE $200 for the set. [patriot]
 
Posted by 64valves*pbr* (Member # 7295) on :
 
will stock a arms fit
 
Posted by J's DDLY SNK (Member # 2016) on :
 
yes, with the spring perches stock A-arms can be used.

[ February 18, 2007, 07:51 PM: Message edited by: J's DDLY SNK ]
 
Posted by J's DDLY SNK (Member # 2016) on :
 
TTT
 
Posted by J's DDLY SNK (Member # 2016) on :
 
Will trade for parts too. I'm looking for a S281 wing.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com