quote:

---

Originally posted by tgarlock:
Hi All,

I am new here but wanted to see if there is anyt interest in meeting on Oct 11 at Sac raceway. I am hoping to improve on my best of 11.4@122 with my new whipple. Hope to see some of you there, maybe we can setup a race.

Tyler G.

---

You should wait until the following Sat. night Oct. 18th. My cousin and I will be out there on the 18th. Thats the last Grudge night of the year at Sac Raceway. You will find more races for your street car at Grudge night than showing up on a Test and Tune. Plus Grudge is $35 to run your car and TNT is $50
 

---

Posted by 707vibrantcobra93 (Member # 4702) on :
 
+1 for grudge, matt i'll be there cheering you and zach on again, waiting to see that 9 sec pass, hopefully i'll have some tires buy then and i'll be there driving instead of watching
 

---

Posted by tgarlock (Member # 8645) on :
 
Since I ran the 11.4 i have added the whipple. I am making more power and ALOT more torque.

I am gonna go figure things out on the 11th and I will also make the 18th for both test n tune and grudge fest.

Just thought I'd invite anyone interested in racing to come on out.

Tyler G.
 

---

Posted by SmokinLX (Member # 1684) on :
 

quote:

---

Originally posted by tgarlock:
Since I ran the 11.4 i have added the whipple. I am making more power and ALOT more torque.

I am gonna go figure things out on the 11th and I will also make the 18th for both test n tune and grudge fest.

Just thought I'd invite anyone interested in racing to come on out.

Tyler G.

---

Nice times for a stock blower, did You have the steggy mod? I will try to make it out to the grudge and We can run em! Should be a good race .
 

---

Posted by tgarlock (Member # 8645) on :
 
11.4 was with a small shot of n2o, 11.8@116 just blower. The 11.4 was on a 104 degree day at Sac, with the new power from the whipple I am really hopiing for a 10.XX@128ish
 

---

Posted by SmokinLX (Member # 1684) on :
 

quote:

---

Originally posted by tgarlock:
11.4 was with a small shot of n2o, 11.8@116 just blower. The 11.4 was on a 104 degree day at Sac, with the new power from the whipple I am really hopiing for a 10.XX@128ish

---

How much boost You got flowing? You on slick's or DR's? Good luck on hittin 10's

 

---

Posted by Yellow94GT (Member # 431) on :
 
Welcome to the board Tyler! Are you planning on running with that insanely small 2.60 pulley? Should be a good time.

I'm thinking I may bring out my car for for the last grudge. It seems like there are going to be so many cars out there breaking the rules for going too fast I might get over looked.
 

---

Posted by tgarlock (Member # 8645) on :
 
Hi Drew,

Yes i fully plan on running that little pulley. I am breaking the rules as well. No cage no drive shaft loop. oh well. Hope to see you out there. I will be sending an email to you later about the suspension and Mach rear.

Tyler G
 

---

Posted by need-a-cage (Member # 5415) on :
 
Do they usually kick you out after one pass?

If I get my axles by the 18th I would love to run it all out with the smaller pulley and ET Streets, but Sac is a long way to go for 1 pass, not to mention the gas cost and gate fee. I would be pissed if it was 11.001 and I get kicked out. It might be worth it if it was a 10.99!

Craig
 

---

Posted by forced331 (Member # 1270) on :
 

quote:

---

Originally posted by need-a-cage:
Do they usually kick you out after one pass?

If I get my axles by the 18th I would love to run it all out with the smaller pulley and ET Streets, but Sac is a long way to go for 1 pass, not to mention the gas cost and gate fee. I would be pissed if it was 11.001 and I get kicked out. It might be worth it if it was a 10.99!

Craig

---

quote:

---

Originally posted by need-a-cage:
Yep, .001 can make a HUGE difference if it was a 11.000 vs a 10.999. I think a 10.80 would definitely be worth it. However, if I break it in Sac the wife will KILL ME!

I need to just put a cage in the thing so I can do it at Sears Point. Give another 2 years and I will get the cage.

---

cUROFF FOR CAGE IS 11.49 RITE? They will probably tell You to leave with a 11.49 or quicker .
 

---

Posted by 8stang8 (Member # 8082) on :
 

quote:

---

Originally posted by need-a-cage:
Do they usually kick you out after one pass?

If I get my axles by the 18th I would love to run it all out with the smaller pulley and ET Streets, but Sac is a long way to go for 1 pass, not to mention the gas cost and gate fee. I would be pissed if it was 11.001 and I get kicked out. It might be worth it if it was a 10.99!

Craig

---

They usually kick you out depending on the way you look ...
j/p

The person at the booth will tell you about it and warn you then to go ask TECH

Thats what they told me about not having a 5 point harness jus install one next time, go have fun. The staff at sac is nothing like infineon.

[ September 23, 2008, 07:43 PM: Message edited by: 8stang8 ]
 

---

Posted by WickedStang (Member # 7692) on :
 
Or just drive through the both without stoping for ur slip and they wont tell ne thing. If u want ur slip have a buddy pick it up for u or something. lol
 

---

Posted by Purple Coupe (Member # 6342) on :
 
Ill be out their on the 11th as well, shooting fot a low 10.5 high 10.4 i just put a pully on and played with a few more things. Also just ordered the methanol kit, front springs and some et drags.. i was going through traps about 6900 so needed a taller tire with more meat. Want to get everything fine tuned so ill be ready for grudge

[ September 23, 2008, 08:00 PM: Message edited by: Purple Coupe ]
 

---

Posted by Purple Coupe (Member # 6342) on :
 

quote:

---

Originally posted by WickedStang:
Or just drive through the both without stoping for ur slip and they wont tell ne thing. If u want ur slip have a buddy pick it up for u or something. lol

---

lmao.... i have done that so many time's
 

---

Posted by 1HaTCheD5LiTEr (Member # 8269) on :
 
Hey Tyler this is Nick. Are you trying to meet up somewhere before we drive up there?
 

---

Posted by LS1EATR (Member # 2702) on :
 
Welcome to CAFORDS, I'll be out there oct 18 grudge fest see you out there drew, That clutch you install on my car works hella good, hopefully I'll do a better time at the track low 11s
 

---

Posted by tgarlock (Member # 8645) on :
 

quote:

---

Originally posted by 1HaTCheD5LiTEr:
Hey Tyler this is Nick. Are you trying to meet up somewhere before we drive up there?

---

quote:

---

Originally posted by tgarlock:

quote:

---

Originally posted by 1HaTCheD5LiTEr:
Hey Tyler this is Nick. Are you trying to meet up somewhere before we drive up there?

---

If you want to go we can meet anywhere along the way. Coming from Hayward do you take 880-80 or go over 580-680-80?

---

quote:

---

Originally posted by tgarlock:

quote:

---

Originally posted by 1HaTCheD5LiTEr:
Hey Tyler this is Nick. Are you trying to meet up somewhere before we drive up there?

---

If you want to go we can meet anywhere along the way. Coming from Hayward do you take 880-80 or go over 580-680-80?

---

I normally go 580-680-80 just because the new bridge is way easier and on a sat traffic should be minimal

I'd like to join you guys but i think me and my car are too fresh in the memory of the tech guys
 

---

Posted by 1HaTCheD5LiTEr (Member # 8269) on :
 

quote:

---

Originally posted by tgarlock:

quote:

---

Originally posted by 1HaTCheD5LiTEr:
Hey Tyler this is Nick. Are you trying to meet up somewhere before we drive up there?

---

If you want to go we can meet anywhere along the way. Coming from Hayward do you take 880-80 or go over 580-680-80?

---

Well I'm in San Lorenzo so ur right in my backyard basically. I take 580 which turns into 205, 5 to 4 to 99. If you wanna meet up lets meet at a local spot like the greenhouse in san leandro or something.

and trixsnk...you're more than welcome to join us if u change your mind

[ September 24, 2008, 03:54 PM: Message edited by: 1HaTCheD5LiTEr ]
 

---