This is topic Hi guys I'm a new member... in forum Drag Racing at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=000073
Posted by xnake (Member # 330) on :
 
Cool site! I'm a newly registered member. I met some of you guys already at the track (the brain, stocker, st5150). Bryan the guy with the new 01 Cobra vert told me about this site. Looking forward to meeting all of you guys. Regards to all

Lito

------------------
2001 Cobra coupe, silver
FRPP 4:10's
DenseCharger
3" Race Magnum Ultraflows by Dynomax
MGW Accesories
1/4 ET: 13.70@103.96

 

Posted by TheBrain (Member # 35) on :
 
Welcome to the site Lito

See you at the track again SOON

Brian

------------------
1989 LX Ragtop.
Keith Craft 331, AFR 165 heads, GT-40 intake, 65mm TB, 76 mm C&L MAF, 30 lb injectors, 190 lph pump, Kirban Billet AFPR, FRPP spark plug wires, FRPP Rpm Extender, Goodyear Silicone hoses, MSD 6AL box, Harland Sharp Roller Rockers, TFS Stage 2 cam, JBA Shorty headers, Stock 4 cat H-pipe, AOD to T-5Z swap, Griggs in-floor frame kit, Cervini Cobra Grille, Cervini Cobra R hood, blah, blah, blah.....
New best !!! 13.2 @ 103.45 mph
I know the stock H-pipe hurt the performance
Bassani X-pipe is installed, but no times yet
 

Posted by TheBrain (Member # 35) on :
 
Damn, forgot to upate my signature
Until now

------------------
1989 LX Ragtop.
Keith Craft 331, AFR 165 heads, GT-40 intake, 65mm TB, 76 mm C&L MAF, 30 lb injectors, 190 lph pump, Kirban Billet AFPR, FRPP spark plug wires, FRPP Rpm Extender, Goodyear Silicone hoses, MSD 6AL box, Harland Sharp Roller Rockers, TFS Stage 2 cam, JBA Shorty headers, Bassani x-pipe w/cats, BBK "street" pulleys, AOD to T-5Z swap, Griggs in-floor frame kit, Cervini Cobra Grille, Cervini Cobra R hood, blah, blah, blah.....
New best !!! 12.67 @ 109.08 w/1.83 60ft !!
 

Posted by JoeT (Member # 298) on :
 
hey Lito, who's this? (sorry it's blurry, camera man was moving)

 
Posted by JoeT (Member # 298) on :
 
here's another one Lito...

 
Posted by xnake (Member # 330) on :
 
Thanks Joe,
That my coupe, Brian is the one on the vert

------------------
2001 Cobra coupe, silver
FRPP 4:10's
DenseCharger
3" Race Magnum Ultraflows by Dynomax
MGW Accesories
1/4 ET: 13.70@103.96

 

Posted by JSGIVUP (Member # 333) on :
 
Lito, Whats up? This is Brian (JSGIVUP)from Sac. raceway with the 2001 Cobra Conv. After you left I ran a 13.7 at 103MPH with a 60ft of 2.2. Not bad for my first time at the track with only bazzani exhaust. Need to work on the 60ft though. What was your 60ft with your 13.7 pass at 103mph? Glad to see you made it to the site. Talk to ya soon,

Brian


 

Posted by xnake (Member # 330) on :
 
Great job Brian,
Here's my #'s 13.708 60' 2.128 @103.969.

check this out

2001 4.6L V-8 Ford Mustang Cobra Supercharging System

CHANNEL ISLANDS, CA (July 5, 2001) – Vortech Engineering, Inc. announces the introduction of the 2001 4.6 V-8 Ford Mustang Cobra Supercharging System.

The addition of the V-2â SQÔ (super quiet) counter clockwise rotation E-Trim, supercharging system increased horsepower to 464 (stock 320) and torque to 406 ft./lbs. (stock 317 ft./lbs.). The installation of this system allows retention of all factory accessories including A/C and power steering.

All components needed to bolt the system on to a stock vehicle, such as mounting plates, fuel system upgrades, supercharger oil feed and drain, reprogrammed ECM chip, necessary nuts and bolts, and compressor bypass valve are included. A satin or polished finish is available. This system is OBD II compatible and is CARB exempt under E.O. #D-213-17.

The Ford Mustang Cobra supercharging system is available wherever Vortech products are sold.

For more information contact Vortech Engineering at 805.247.0226 or www.vortechsuperchargers.com.

regards
Lito

------------------
2001 Cobra coupe, silver
FRPP 4:10's
DenseCharger
3" Race Magnum Ultraflows by Dynomax
MGW Accesories
1/4 ET: 13.70@103.96

 

Posted by JoeT (Member # 298) on :
 
delete

[This message has been edited by stocker (edited 08-02-2001).]
 

Posted by JSGIVUP (Member # 333) on :
 
Stocker, I could swear that I saw you wave me to go ahead, I guess not. Sorry about that. My mistake. I think I ended up getting another run after that. Thanks for posting the picture, preciate it.

JSGIVUP
 

Posted by JoeT (Member # 298) on :
 
delete

[This message has been edited by stocker (edited 08-02-2001).]
 





Fueled by Ford Mustang Owners
on CaliforniaFords.com