This is topic MasterPro PS Pump in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=063771

Posted by fredfifty (Member # 10320) on :
 
anybody got feedback on em? they are from oreilly and have a lifetime warranty and not to mention im getting it for only 40 bucks! (employee price shhhh)

from what i read online, they are loud, but wondering if anyone here has had them on their fox and can give feedback.

LMR ford one is 176 iirc, if this one goes bad, ill probably snatch that one.
 
Posted by NEIGHT (Member # 8741) on :
 
I don’t know what brand is mine but I’m running either an oreilys or autozone replacement one on my hatch. Doesn’t make any noise at all, just gotta bleed it correctly. First one I didn’t do it right and it blew out the seals on my 2 mile rack and pinion. Lol
 
Posted by fredfifty (Member # 10320) on :
 
yea man, im checking out vids on flushing out the old fluid now. and its a bitch to get the pulley off if you dont have a table vise. i was looking like a fool fighting this pulley off while its loose on a table/ground. got that fucker off though
 
Posted by NEIGHT (Member # 8741) on :
 
quote:
Originally posted by fredfifty:
yea man, im checking out vids on flushing out the old fluid now. and its a bitch to get the pulley off if you dont have a table vise. i was looking like a fool fighting this pulley off while its loose on a table/ground. got that fucker off though

You don’t have a puller? Mine came off easy with the puller but then again my old pump was seized so i don’t know if that helped me pull it off easier. If I remember correctly I think I had the front on jack stands and had the car idling so the fluid can circulate a little bit then I filled it to the top and kept turning it lock to lock until it didn’t make and noise at all anymore. The old pump I did the same thing but on the ground. I damn near fell turning the steering wheel when the seal blew out lol
 
Posted by fredfifty (Member # 10320) on :
 
i used a puller but its tough if the unit isnt secured to something.

yea ill have to do the lock to lock fluid flush.... from what i was told on youtube, disconnect the return hose and empty fluid in container and cap the nipple cooler line. seems easy enough i hope. pickin up my $40 ps pump today, shit i might as well get hoses too
 
Posted by NEIGHT (Member # 8741) on :
 
quote:
Originally posted by fredfifty:
i used a puller but its tough if the unit isnt secured to something.

yea ill have to do the lock to lock fluid flush.... from what i was told on youtube, disconnect the return hose and empty fluid in container and cap the nipple cooler line. seems easy enough i hope. pickin up my $40 ps pump today, shit i might as well get hoses too

Oh ok I didn’t watch a video to be honest. I just do shit like I know what I’m doing which is why I blew out the seal the first time. Lol
You get the new pump on?
 
Posted by fredfifty (Member # 10320) on :
 
quote:
Originally posted by NEIGHT:
quote:
Originally posted by fredfifty:
i used a puller but its tough if the unit isnt secured to something.

yea ill have to do the lock to lock fluid flush.... from what i was told on youtube, disconnect the return hose and empty fluid in container and cap the nipple cooler line. seems easy enough i hope. pickin up my $40 ps pump today, shit i might as well get hoses too

Oh ok I didn’t watch a video to be honest. I just do shit like I know what I’m doing which is why I blew out the seal the first time. Lol
You get the new pump on?

yup pump went in, flushed old crap fluid out and replaced with royal purple ps fluid, no whining so far
 
Posted by NEIGHT (Member # 8741) on :
 
quote:
Originally posted by fredfifty:
quote:
Originally posted by NEIGHT:
quote:
Originally posted by fredfifty:
i used a puller but its tough if the unit isnt secured to something.

yea ill have to do the lock to lock fluid flush.... from what i was told on youtube, disconnect the return hose and empty fluid in container and cap the nipple cooler line. seems easy enough i hope. pickin up my $40 ps pump today, shit i might as well get hoses too

Oh ok I didn’t watch a video to be honest. I just do shit like I know what I’m doing which is why I blew out the seal the first time. Lol
You get the new pump on?

yup pump went in, flushed old crap fluid out and replaced with royal purple ps fluid, no whining so far
Royal purple? Damn you fancy lol
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com