This is topic 02 gt oil pan tap for charger in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=063219
Posted by 93ex chp (Member # 9016) on :
 
Any shops around the pinole/richmond area that can do this? Looking to get it done asap please let me know
 
Posted by stanger00 (Member # 13818) on :
 
The hardest part for this was getting enough room to swing the hammer to hit the punch. You can buy the NPT tap at Home Depot and buy some bearing grease at vato zone to coat the tap. Should take a few minutes.
 
Posted by 93ex chp (Member # 9016) on :
 
Yeah seems pretty easy actually. What size punch do i use ?? Going to try it myself after reading up on it. Punch set grease and a tap set and i should be golden right?

quote:
Originally posted by stanger00:
The hardest part for this was getting enough room to swing the hammer to hit the punch. You can buy the NPT tap at Home Depot and buy some bearing grease at vato zone to coat the tap. Should take a few minutes.

 
Posted by stanger00 (Member # 13818) on :
 
I don't know. On vortech website they have the installl manuals and list all the tools you need.
 
Posted by 70stang351w (Member # 9948) on :
 
Found this may help..

http://www.superchargersonline.com/index.php?main_page=page&id=33
 
Posted by 93ex chp (Member # 9016) on :
 
Helped alot thanks man appriciate the help!!
quote:
Originally posted by 70stang351w:
Found this may help..

http://www.superchargersonline.com/index.php?main_page=page&id=33

 
Posted by 70stang351w (Member # 9948) on :
 
No Problem just tryin to help
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com