Fox H/C/I help - Northern California Ford Owners

This is topic Fox H/C/I help in forum General Talk at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=062747

Posted by A_Calderown (Member # 13394) on :

Im looking to get a combo on my fox and wanted to know what some of you all think or have recommendations. I was thinking
AFR 165cc
Trick flow stage 1 cam
Edelbrock rpm 2
With some 1.6 rockers

Posted by LXjames (Member # 10791) on :

Seems like a decent plan but there may be better cam choices out there

Posted by adower (Member # 5955) on :

A lot of people I've seen with Afrs like an FTI cam

Posted by CoyoteMike (Member # 13748) on :

quote:
Originally posted by adower:
A lot of people I've seen with Afrs like an FTI cam

Posted by Saleen 00-768 (Member # 9379) on :

Go with afr 185s and a custom cam

[ 2016-01-17, 01:02 PM: Message edited by: Saleen 00-768 ]

Posted by A_Calderown (Member # 13394) on :

Im trying to keep it smog legal street car. I heard the trick flow stage 1 will pass but you have to say its a E303 cam.

Posted by Pure Stang (Member # 7251) on :

You can order a custom cam that's smog legal and will make more power than a off the shelf cam. Afr 185's 58cc (smog legal) custom cam and a rpm2 and you'll be happy.

Posted by SIC9250 (Member # 8216) on :

Dohc 32v

Posted by ed650 (Member # 9897) on :

I have explorer intake port matched to my afr 165s with a comp cam xe270hr..

Posted by Sinister Mustang (Member # 13889) on :

I'd go custom cam, strictly because there's obviously better cam choices out there.

Its up to you, though. AFR 185s wouldn't be a bad idea either.

Posted by Aztec 5.0 (Member # 13859) on :

how much does a custom cam cost generally, and what do they run to install?

Posted by LXjames (Member # 10791) on :

quote:
Originally posted by Aztec 5.0:
how much does a custom cam cost generally, and what do they run to install?

I think a custom fti cam is just above 300? But when you get more power and drivability than anything on the market it's worth it. And it's generally a 500 dollar job for install. I think that's parts and labor not including the initial cost of the cam

Posted by 84SVOrick (Member # 9039) on :

Anderson n21 or n41 ftw

Posted by hurting your feelings (Member # 13641) on :

Ls saw everythang

Posted by Riggidy (Member # 14194) on :

I just sent you a pm...i had the same goals until i decided to go coyote.
I have a set of brand new ford stroker prepped tw 170 heads and a brand holley systemax intake that i wont be using. Combined with the right cam and this would be a great smog legal setup.

Fueled by Ford Mustang Owners
on CaliforniaFords.com