This is topic 4cyl to 5.0 swap in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=062274

---

Posted by 1fastnotch (Member # 13686) on :
 
So I'm ready to start this project, I have a running hatch,and a stripped 4cyl coupe shell, any advice before I start, or easier methods or even where to start to make things easier, thanks in advance
 

---

Posted by CoyoteMaster (Member # 13680) on :
 
Make sure to post pics of work would like to see the progress
 

---

Posted by RRRCobraSC281 (Member # 7086) on :
 
remove the Motor, trans, rearend, brake lines and fuel lines. Then put the V8 stuff in reverse order
 

---

Posted by 1fastnotch (Member # 13686) on :
 
http://rs1027.pbsrc.com/albums/y340/V8musclepower1fastcoupe/Mobile%20Uploads/20141130_124119_zpsdfkofn93.jpg~320x480
 

---

Posted by RRRCobraSC281 (Member # 7086) on :
 
Nice clean body. Start with the fuel and brake lines to the rear while you don't have all the stuff in the way. You'll need a river gun and some 3/16" rivets and some of the screws to remount the lines. The rest is pretty much straight forward.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com