This is topic slammed notchback dslr pics in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=060876

---

Posted by a302juGRnot (Member # 10163) on :
 
i recently took some pics of my notch with a dslr camera i borrowed. i never really fiddled with one before but its an amazing difference from my point and shoot.

i also got into some editing so for those who are into photo editing, lmk what you think.























[ 2014-06-13, 08:43 PM: Message edited by: a302juGRnot ]
 

---

Posted by a302juGRnot (Member # 10163) on :
 





 

---

Posted by Stanced Stang (Member # 11891) on :
 
I really like your car. I seen it at Knotts and was amazed that of all the tires you could be using, they are runflats. lol
 

---

Posted by cpthowdy (Member # 10055) on :
 
Very nice pics sir
 

---

Posted by racsirx (Member # 1710) on :
 
It's not low enough, I can still see under the car
 

---

Posted by losbadgts (Member # 4394) on :
 
Bad ass ride. Cars like this make me want to get a fox body again.
 

---

Posted by SydeWaySix (Member # 3596) on :
 
One of my favorite notchbacks
 

---

Posted by Broke4.6 (Member # 9085) on :
 
Omfg this car is killin it!!! Stance
 

---

Posted by JohnCM (Member # 1076) on :
 
Looks so nice
 

---

Posted by Rio1999GT (Member # 9231) on :
 
Want to sell it?
 

---

Posted by BOSS 32V (Member # 8125) on :
 
Killer notch
 

---

Posted by NorCalRydaz (Member # 3233) on :
 

quote:

---

Originally posted by racsirx:
It's not low enough, I can still see under the car

---

quote:

---

Originally posted by NorCalRydaz:

quote:

---

Originally posted by racsirx:
It's not low enough, I can still see under the car

---

Looks like it sits higher in the back

---

quote:

---

Originally posted by racsirx:
It's not low enough, I can still see under the car

---

quote:

---

Originally posted by Rio1999GT:
Want to sell it?

---

quote:

---

Originally posted by Outlaw_Stangz:
Looks so sick. I would like to see it lower with more camber in the rear.

---

Thanks man. I love the slammed/flush look but I don't like it too extreme. I really like how it sits now so ill prolly leave it.

[ 2014-06-14, 04:46 PM: Message edited by: a302juGRnot ]
 

---

Posted by Pure Stang (Member # 7251) on :
 
Bad ass notch.
 

---

Posted by a302juGRnot (Member # 10163) on :
 

quote:

---

Originally posted by NorCalRydaz:

quote:

---

Originally posted by racsirx:
It's not low enough, I can still see under the car

---

Looks like it sits higher in the back

---

quote:

---

Originally posted by 06ragtopgt_SOS:
Clean as always Gio! The Social Networks' favorite notch! Some FB page called speed society posted your car a few days ago.

---

quote:

---

Originally posted by 99 blue bird:
What size and brand wheels are those? Car looks amazing.

---

Xxr 521 wheels. 18x10 on all 4 corners
 

---

Posted by SIC9250 (Member # 8216) on :
 
Clownin'
 

---

Posted by fredfifty (Member # 10320) on :
 
beautiful. do you have adj. upper and lower arms in the rear?

[ 2014-06-16, 08:15 AM: Message edited by: fredfifty ]
 

---

Posted by SL0BRA650 (Member # 10274) on :
 
Love this notch man. Good job.
 

---

Posted by racsirx (Member # 1710) on :
 
I know I asked you about this before but I forgot, what's it like turning and making u-turns with a 10" rim in front? I have had 9" front rims on a Foxbody and I have some 9.5" rims I might want to try on a Foxbody,
 

---

Posted by a302juGRnot (Member # 10163) on :
 

quote:

---

Originally posted by fredfifty:
beautiful. do you have adj. upper and lower arms in the rear?

---

quote:

---

Originally posted by racsirx:
I know I asked you about this before but I forgot, what's it like turning and making u-turns with a 10" rim in front? I have had 9" front rims on a Foxbody and I have some 9.5" rims I might want to try on a Foxbody,

---

i used to have trouble doing u turns with the stock front control arms. i replaced it with tubular control arms(i believe they were qa-1) and i can do a full turn with no rubbing.

im sure you can fit a 9.5 with the stock arms but youd need a lower offset wheel. if you keep the backspacing the same or less as the 9inch wide wheels, it should be fine. if you know the offsets of both wheels, i can tell you if they will work or not.
 

---

Posted by stangin' (Member # 514) on :
 
sweet as always. let me know if it's for sale . a friend has been looking for a nice notch for a while.
 

---

Posted by racsirx (Member # 1710) on :
 

quote:

---

Originally posted by a302juGRnot:

quote:

---

Originally posted by racsirx:
I know I asked you about this before but I forgot, what's it like turning and making u-turns with a 10" rim in front? I have had 9" front rims on a Foxbody and I have some 9.5" rims I might want to try on a Foxbody,

---

i used to have trouble doing u turns with the stock front control arms. i replaced it with tubular control arms(i believe they were qa-1) and i can do a full turn with no rubbing.

im sure you can fit a 9.5 with the stock arms but youd need a lower offset wheel. if you keep the backspacing the same or less as the 9inch wide wheels, it should be fine. if you know the offsets of both wheels, i can tell you if they will work or not.

---

quote:

---

Originally posted by racsirx:

quote:

---

Originally posted by a302juGRnot:

quote:

---

Originally posted by racsirx:
I know I asked you about this before but I forgot, what's it like turning and making u-turns with a 10" rim in front? I have had 9" front rims on a Foxbody and I have some 9.5" rims I might want to try on a Foxbody,

---

i used to have trouble doing u turns with the stock front control arms. i replaced it with tubular control arms(i believe they were qa-1) and i can do a full turn with no rubbing.

im sure you can fit a 9.5 with the stock arms but youd need a lower offset wheel. if you keep the backspacing the same or less as the 9inch wide wheels, it should be fine. if you know the offsets of both wheels, i can tell you if they will work or not.

---

I just have the 9.5" rims , 30mm offset, 6.39" backspacing

---

That will deff rub like crazy lol. You'd need under 6 inch back spacing to make do. Or u can but 200$ control arms.
 

---

Posted by diablounicorn (Member # 13033) on :
 
good shit gio, you finally driving it around more often?
 

---

Posted by Vndcatr (Member # 2343) on :
 
not huge on foxes, But damn yours is Nice!
 

---

Posted by a302juGRnot (Member # 10163) on :
 

quote:

---

Originally posted by diablounicorn:
good shit gio, you finally driving it around more often?

---