This is topic Pilot bearings in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=060396
Posted by 90GT510 (Member # 9199) on :
 
Fucking suck! The end.
 
Posted by Stang66 (Member # 10504) on :
 
Yes, they're fun!
 
Posted by racsirx (Member # 1710) on :
 
Let guess you had to cut it out?
 
Posted by 90GT510 (Member # 9199) on :
 
I laid there and chiseled away finally got it into two seperate pieces and popped it out.
 
Posted by wilit (Member # 3367) on :
 
I've always had good luck soaking them with PB blaster and then pulling them with a puller like this:

http://www.harborfreight.com/3-jaw-pilot-bearing-puller-4876.html
 
Posted by 89bluenotch (Member # 7454) on :
 
Just did one! Came out easy using the puller. Fuck packing it with grease and forcing it out
 
Posted by warhorse58gt (Member # 7702) on :
 
Slide hammer. [Wink]
 
Posted by Beastly GT500 TVS (Member # 9723) on :
 
quote:
Originally posted by warhorse58gt:
Slide hammer. [Wink]
exactly
 
Posted by 90GT510 (Member # 9199) on :
 
quote:
Originally posted by Beastly GT500 TVS:
quote:
Originally posted by warhorse58gt:
Slide hammer. [Wink]
exactly
Slide hammer didn't work. I was at a last resort when I did what I did.
 
Posted by Greasy (Member # 5258) on :
 
quote:
Originally posted by Beastly GT500 TVS:
quote:
Originally posted by warhorse58gt:
Slide hammer. [Wink]
exactly
Works everytime
 
Posted by CoyoteCoupe (Member # 9621) on :
 
I always remove them with water and paper. Works every single time.
 
Posted by t-top50 (Member # 2735) on :
 
+1 slide hammer
 
Posted by 50Reasons (Member # 6452) on :
 
Yes I hate them as well, puller works best for me
 
Posted by Built88LX (Member # 10758) on :
 
I always use the puller also works like a charm
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com