This is topic Can someone help me put together a complete 5 lug conversion for my 87 2.3L? in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=029121
Posted by 50 GT (Member # 6903) on :
 
I would really appreciate it if someone can help me put together a complete 5 lug conversion for my 87 2.3L? Maybe alist of parts and where to gt them, or if someon has a compete set and could hook it up. Thanks
 
Posted by Blind (Member # 3052) on :
 
you need a lot of parts to convert a 4cyl to 5lug.

you can either do it cheap, with take-off v8 foxbody spindles, calipers, pads, wheel bearings, and lincoln mark7 rotors (5 lug).

or go with better brakes, and get 1995 mustang spindles, calipers, rotors, pads.


in the rear you just need ranger / aerostar 5 lug axles, and drums.


www.sn95brakes.com has a parts listing, checkout the 4 lug brake upgrades section.
 
Posted by JohnB (Member # 969) on :
 
The cheapest kit? 5 lug rotors from a 4cyl Ranger and axles/drums from the same. Will run you about $$90 from a junkyard.
 
Posted by PurpleNotch (Member # 2902) on :
 
I too can do a full conversion for you there are a few options if you end up needing a hand pm me thanks! ..Id go with john B first he rocks at that stuff but if hes unavailable hit me up! Thanks, shaun [patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com