This is topic where to buy a tapered punch in forum General Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=024149
Posted by Hungry Hippo (Member # 537) on
:
i need a 5/8" punch and can't find one anywhere. not even ebay or harbor freight. anyone know where to buy one?
Posted by RiddlerGT (Member # 113) on
:
if you can wait I can order one from my work
Posted by 66 AC COBRA (Member # 904) on
:
what do you need it for
blower install??
Posted by Hungry Hippo (Member # 537) on
:
nate, where do you work?
eric, yep
Posted by hard60 (Member # 6247) on
:
pro turbo kits sells em
Posted by mtbaughs (Member # 4052) on
:
Just track down a mac, snap on or matco tool truck. There's a good chance they will have one on the truck. I've made that hole in the oil pan before without that large punch but you have to do it with great care. First make a small hole in the right spot with a smaller diameter punch which you can get at OSH. Than start with small sockets and gradually increase the diameter of the sockets until you can thread the tap into it. In using deep sockets you will still achieve the rolling effect that you'll need to make the right amount of threads.
Posted by RiddlerGT (Member # 113) on
:
monument car parts, SR
Posted by NO MANRZ (Member # 566) on
:
paxton sells the tool also.
Posted by silverLX (Member # 3207) on
:
I got my whole punch set at sears.
Fueled by Ford Mustang Owners
on CaliforniaFords.com