Northern California Ford racer's Message Board Forum Sell & Buy Ford Parts in Northern California Classifieds Mustang Pictures / Videos of Ford Cars in Northern California

Northern California Ford Owners  


Post New Topic  New Poll  Post a Ford message board Reply
read DMs/my profile login | join CAFords | search | faq |
  next oldest topic   next newest topic
» Northern California Ford Owners     » Automotive   » General Talk   » flushing out block due to rust

 - Email this post to someone!    
Author Topic: flushing out block due to rust
KARATExxCHUCK
¯
Member # 12851

Ford Icon 1 posted      Profile for KARATExxCHUCK  Ford pictures for KARATExxCHUCK    Send New Direct Message       Edit/Delete Post   Reply With Quote       Share this CAFords post on FB
So my 92 Mustang sat for a couple years and the radiator had rust. There was rust in the hoses so I'm replacing the upper and lower hose along with the radiator. I'm worried that there might be rust and particulates in the block. What is the best way to remove all that stuff? The the motor is still in the car!

Charles [patriot]

--------------------
**Sometimes you must kill the snake to walk the path!!
**Message me for Powder Coating and Sand blasting!!!:)

Posts: 1281 | Registered: Apr 2013  |  :
NEIGHT
¯
Member # 8741

Ford Icon 1 posted      Profile for NEIGHT  Ford pictures for NEIGHT    Send New Direct Message       Edit/Delete Post   Reply With Quote       Share this CAFords post on FB
You used non distilled water in there?

--------------------
-Savage Habits-
1992 Summer Edition
1986 Hatch- catfish killer
1964 Impala hard top

Posts: 18526 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008  |  :
Boss 327
¯
Member # 9143

Ford Icon 1 posted      Profile for Boss 327  Ford pictures for Boss 327    Send New Direct Message       Edit/Delete Post   Reply With Quote       Share this CAFords post on FB
Have you ran the car since putting new hoses and radiator in?

--------------------
"You'll never truly understand building engines until you can make power N/A. FI overshadows an engines defficiency." Al Papito

Posts: 1789 | From: East Bay | Registered: May 2009  |  :
Blind
2.3L
CAFords OG
Member # 3052

Ford Icon 1 posted      Profile for Blind  Ford pictures for Blind    Send New Direct Message       Edit/Delete Post   Reply With Quote       Share this CAFords post on FB
I had to replace the freeze plugs on my block after it sat for awhile, with them out I was able to scoop out a bunch of the gunk but a lot was still in there. Previous owner of the block must have ran straight water with no tstat.

With the block drain plug removed it was pretty easy to flush and fill. I ran prestone super radiator flush for a couple hundred miles along with distilled water. Then replaced heater core + radiator + water pump + tstat + hoses.

--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi

Posts: 8521 | From: Fairfield | Registered: Jul 2003  |  :
Vortech Saleen
¯
Member # 7494

Ford Icon 1 posted      Profile for Vortech Saleen  Ford pictures for Vortech Saleen    Send New Direct Message       Edit/Delete Post   Reply With Quote       Share this CAFords post on FB
I didn’t pull the freeze plugs but I did removed the hoses to the radiator and the heater core and flushed with garden hose until water ran clear. Lots of build up in the radiator too. Just kept hitting the inlet and outlet with high pressure hose water.
Posts: 50 | From: Sacramento | Registered: Mar 2007  |  :
SLOWSN95
¯
Member # 8269

Ford Icon 1 posted      Profile for SLOWSN95  Ford pictures for SLOWSN95    Send New Direct Message       Edit/Delete Post   Reply With Quote       Share this CAFords post on FB
There are some chemicals you can run with straight water that will help break up rust. I use the Prestone Flush+Cleaner. Use one bottle with straight water.. follow instructions and use for an extended period of time. If you feel that it should be done again, then repeat.

When finished with the chemicals, make sure you flush out the engine with water like you have previously done.. the prestone does leave a residue.

Also, make sure you disconnect the heater core and flush with the hose in both directions. I like to hook the gardening hose to one of the heater core lines and a separate clear hose up to the other heater core line to see when debris has stopped coming out of it, then reverse the hoses to back flush.

Good luck. I know this process can be long and tedious.

--------------------
94' GT
347 Stroker
MM Suspended

2003 SB SVT Lightning
Pullied and Lowered

89'Hatch-SOLD

Posts: 2214 | From: 510/east bay | Registered: Mar 2008  |  :


 
Post New Topic  New Poll  Post a Ford message board Reply Close Topic   Feature Topic   Move Topic   Delete Topic next oldest topic   next newest topic
 - Printer friendly view of this Ford topic
Hop To:

Questions/Requests/Suggestions? email CAFords



Fueled by Ford Mustang Owners
on CaliforniaFords.com