Author
|
Topic: 4cyl to 5.0 swap
|
1fastnotch
¯
Member # 13686
|
posted
So I'm ready to start this project, I have a running hatch,and a stripped 4cyl coupe shell, any advice before I start, or easier methods or even where to start to make things easier, thanks in advance
Posts: 47 | From: modesto | Registered: Jul 2014
| :
|
|
CoyoteMaster
¯
Member # 13680
|
posted
Make sure to post pics of work would like to see the progress
-------------------- 2013coyote_5.0 93mach1(sold) 32vfoxx(sold) Coyoteswapnotch
Posts: 657 | From: Fremont | Registered: Jul 2014
| :
|
|
RRRCobraSC281
¯
Member # 7086
|
posted
remove the Motor, trans, rearend, brake lines and fuel lines. Then put the V8 stuff in reverse order
-------------------- Project 93GT500 has started 90 Coyote Coupe (sold) 88 Mach 1 Coupe MM&FF 6/14 (sold) 65 FFR Cobra (sold)
Posts: 1746 | From: Fremont, CA | Registered: Sep 2006
| :
|
|
|
RRRCobraSC281
¯
Member # 7086
|
posted
Nice clean body. Start with the fuel and brake lines to the rear while you don't have all the stuff in the way. You'll need a river gun and some 3/16" rivets and some of the screws to remount the lines. The rest is pretty much straight forward.
Posts: 1746 | From: Fremont, CA | Registered: Sep 2006
| :
|
|