Author
|
Topic: 347 Stroker motors BRAND NEW
|
turbo50
¯
Member # 6700
|
posted
Brand new.
Built by me, according to your specs (want it low side clearance, gapped for boost/nitrous, boost or all motor etc).
ALL NEW PARTS.
STANDARD FORD CRATE MOTOR BLOCK
NO CORE REQUIRED!!!
.030 in. overbore, proper clearances for a 3.40 in. stroke crank and H-beam rods, decked, line honed mains, and line bored cam bearings. tapped for pipe plugs and brass freeze plugs, a 1-piece rear main seal, rust protection, and a protective coat of your choice color paint. Compatible with factory hydraulic roller or hydraulic flat cams, and accepts mechanical fuel pumps for old school.
Rotating assembly:
347 or 331 cubic inches, I dont care either way! FORGED LIGHTWEIGHT PISTONS DISH OR FLAT TOP Scat cast iron crank 4340 I beam scat rods with ARP 8740s (I beam stronger on compression, H beams stronger on stretch, either will OUTLIVE the block so....) MOLY RINGS HP CHAMFERED BEARINGS BALANCED 28oz HARMONIC BALANCER INCLUDED (will work on 4 or 3 bolt) Flexplate of your choice (flywheel additional cost if stick shift)
$2490 NO TAX
Pan, timing cover available at additional cost!
As an example, CHP shortblocks are 2600 by the time you pay shipping and taxes and there is a 4 week wait RIGHT now, unless you are a dealer....
These are HAND built for your application.
Dan
925-348-1534 [ October 29, 2012, 05:37 PM: Message edited by: turbo50 ]
-------------------- .........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
CornOil_&_Boost
¯
Member # 5888
|
posted
*wonders when idiots will ask if these are 2 or 4 bolt block*
for $2500...it's a pretty sick deal though... [ October 29, 2012, 06:05 PM: Message edited by: CornOil_&_Boost ]
-------------------- https://www.facebook.com/pushrodpoweredmustangs '95 Cobra - small engine / small turbo - '02 Excursion 7.3 - tow vehicle '14 - Chevy Volt - DD
Posts: 5097 | Registered: Jul 2005
| :
|
|
turbo50
¯
Member # 6700
|
posted
2 bolt and SHORTBLOCK only
-------------------- .........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
How much would this run but DART based so it can hold some good power?
-------------------- -Savage Habits- 1992 Summer Edition 1986 Hatch- catfish killer 1964 Impala hard top
Posts: 18528 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
turbo50
¯
Member # 6700
|
posted
quote: Originally posted by NEIGHT: How much would this run but DART based so it can hold some good power?
You'd want better internals to take advantage of such a nice block but pm me for real world dart block 347 pricing
-------------------- .........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
turbo50
¯
Member # 6700
|
posted
If you supply your own core motor then subtract $150 from the above price.
-------------------- .........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
|