|
Author
|
Topic: 1993 stock Cobra turns over does not start
|
NINETY#FIFTY
¯
Member # 4866
|
posted
 
 
ran the car for 30 mins, got gas, pulled over for 10 min up hill for a phone call, started backup, drove 10 feet. died out...
So far: swapped out coil and ignition control module
checked inertia switch
have spark.fuel pump whines up, checked fuel at schrader valve. fuel is present.
car has 30k on it. drive it about 100 miles a month. any ideas.
--------------------
1990 #50 SALEEN 31K
1988 #363 SALEEN 68K
1993 #2572 COBRA 31k
1993 ACURA INTEGRA 102k
2014 HYUNDAI SONATA 171k
Posts: 111 | From: EAST BAY | Registered: Sep 2004
| :
|
|
Martinna
¯
Member # 12493
|
posted
Any error codes from the computer? Does it crank for ever with out starting, or start and sputter then die?
Posts: 1093 | From: City | Registered: Oct 2012
| :
|
|
4IDFOX
¯
Member # 9921
|
posted
Ignition switch on the column
Posts: 375 | From: Redding CA | Registered: Apr 2010
| :
|
|
NINETY#FIFTY
¯
Member # 4866
|
posted
Cranks forever does not start
Giving a code 95
Checked inertia switch .. one side 6.3v other wire 0v
--------------------
1990 #50 SALEEN 31K
1988 #363 SALEEN 68K
1993 #2572 COBRA 31k
1993 ACURA INTEGRA 102k
2014 HYUNDAI SONATA 171k
Posts: 111 | From: EAST BAY | Registered: Sep 2004
| :
|
|
|
|
NINETY#FIFTY
¯
Member # 4866
|
posted
it was the distributor, swapped it out of my other car. started right up.
i cant get my timing right. cylinder #1 compression stroke TDC. rotor under cap #1. pull spout, adjust timing, put spout back . timing moves. idles good , but all over the place when gasing it..
is it possible that im a tooth off when i install the distributor.
--------------------
1990 #50 SALEEN 31K
1988 #363 SALEEN 68K
1993 #2572 COBRA 31k
1993 ACURA INTEGRA 102k
2014 HYUNDAI SONATA 171k
Posts: 111 | From: EAST BAY | Registered: Sep 2004
| :
|
|
racsirx
CAFords OG
Member # 1710
|
posted
quote:
Originally posted by NINETY#FIFTY:
it was the distributor, swapped it out of my other car. started right up.
i cant get my timing right. cylinder #1 compression stroke TDC. rotor under cap #1. pull spout, adjust timing, put spout back . timing moves. idles good , but all over the place when gasing it..
is it possible that im a tooth off when i install the distributor.
Timing moves around once you install the spout
--------------------
88 Saleen #564
88 GT 331 NOVI2000
88 Coupe TURBO 9.75@142
95 Cobra R #75-SOLD
06 F250
13 BMW AH3
17 GT350 #5556
GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
