|
Author
|
Topic: AOD won't shift past 1st
|
Aztec 5.0
¯
Member # 13859
|
posted
 
 
90' fox AOD. Just started doing this. Clunks when I put it in any gear. Drove away and it wouldn't shift out of first. RPM's drop when I take my foot off and feel like it's in neutral for a second when I step back on it. Only drove about 3 blocks. Checked TV cable at the TB And it is still attached and rubber grommet looks good. Fluid and filter changed last year and fluid is super clean with no debris in it. Any other suggestions on where to look?
Posts: 164 | Registered: Nov 2014
| :
|
|
92_5.0
¯
Member # 7624
|
posted
can you manually shift into other gears?
--------------------
Infineon/Sears point? same difference!
11.8 @ 115 mph @ Sac Raceway
411 rwhp 402 trq (old set up)
540 rwhp 517 rwtrq (new set up)
ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
92_5.0
¯
Member # 7624
|
posted
sounds like possible front pump failure
--------------------
Infineon/Sears point? same difference!
11.8 @ 115 mph @ Sac Raceway
411 rwhp 402 trq (old set up)
540 rwhp 517 rwtrq (new set up)
ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
Aztec 5.0
¯
Member # 13859
|
posted
If I start in 1st and try to shift to D it just stays in 1st. If I start in D or OD it just stays in 1st. TV is still connected and seams to be adjusted correctly with no slack. I am going to drop the pan and see if the linkage has slipped of the valve. I'm hoping that could be it since its jumping into gear like I am giving it gas when I shift from park to drive
Posts: 164 | Registered: Nov 2014
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
