|
Author
|
Topic: ideas for build
|
1slownotch88
¯
Member # 12866
|
posted
 
 
Just acquired a set of gt40 heads that are stock and an e cam. I'm going to be running this setup with a performer intake, 65 mom tb and spacer , 24 lb injectors with 255 pump And mass air,cold air intake and 3:73. any other recommendations for this setup? I am in California so smog is in my future.....
--------------------
If your not first..... your last
Posts: 110 | Registered: Apr 2013
| :
|
|
Greasy
¯
Member # 5258
|
posted
An S-trim
--------------------
'93 Cobra-Coyote Powered
'03 DSG Cobra
'13 Dodge Cummins
'14 Rubicon X
Posts: 3272 | From: North Dallas | Registered: Jan 2005
| :
|
|
1slownotch88
¯
Member # 12866
|
posted
In a perfect world....or a world that sells s trims for a few hundred bucks
--------------------
If your not first..... your last
Posts: 110 | Registered: Apr 2013
| :
|
|
Greasy
¯
Member # 5258
|
posted
I must have misread what your budget is....
--------------------
'93 Cobra-Coyote Powered
'03 DSG Cobra
'13 Dodge Cummins
'14 Rubicon X
Posts: 3272 | From: North Dallas | Registered: Jan 2005
| :
|
|
AR's BLK351FX
¯
Member # 10434
|
posted
Change cam an go f cam .... U could use f cam for boost for future an good go N/a
Turbo ftw
--------------------
88 Turbo357w fox
03 mach 1
Posts: 200 | From: SOLEDAD | Registered: Nov 2010
| :
|
|
coupedup
¯
Member # 9987
|
posted
quote:
Originally posted by 1slownotch88:
In a perfect world....or a world that sells s trims for a few hundred bucks
electric s trim ![[worship]](graemlins/worship.gif)
![[Eek!]](eek.gif) ![[Big Grin]](biggrin.gif)
Posts: 4406 | From: Ca | Registered: May 2010
| :
|
|
norcalfiddy
¯
Member # 11207
|
posted
quote:
Originally posted by 5.SL0W:
quote:
Originally posted by 1slownotch88:
In a perfect world....or a world that sells s trims for a few hundred bucks
electric s trim
thats a E trim..
--------------------
600HP 1996 7.3L powerstroke single cab short bed race truck
Posts: 3393 | From: Brentwood | Registered: Aug 2011
| :
|
|
mechanicalsnake
¯
Member # 11845
|
posted
Gears are always good.. 255lph is too much and will heat the fuel to where u lose octane. A 155 is sufficient enough! Sell e cam and get 172 rr with factory cam. Bump timing to approx 18 degrees( bring down if knock) change springs on heads to support a .550 cam to rid valve float. 19 lb injectors are good as for ur mods as well!
Posts: 42 | From: San Jose | Registered: Mar 2012
| :
|
|
JON_SVT
¯
Member # 9621
|
posted
You'll be good with 19 pound injectors. Upgrading your valve springs on the heads is a must. Trickflow has a drop in set or alexsparts.com has a drop in kit as well, no machining needed.
Posts: 2608 | Registered: Nov 2009
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
