|
Author
|
Topic: 4clyn swap
|
FONYPONY7o7
¯
Member # 7208
|
posted
 
 
GIMME THA REAL DEAL I put alot of money soo far and i hurd i need too do alot more example tha 4 clinder fuel lines compadable or not???? and the kross member same or not ??????????
Posts: 26 | From: YAY AREA | Registered: Nov 2006
| :
|
|
GT302PONY
¯
Member # 6658
|
posted
im pretty sure your going to swap the brakes rear end and that cross member
Posts: 259 | From: san jose | Registered: Mar 2006
| :
|
|
FONYPONY7o7
¯
Member # 7208
|
posted
i got tha rear end im juss alot into it and one of my boyz said that his notch caught fire from tha 4 clyn fuel linez
Posts: 26 | From: YAY AREA | Registered: Nov 2006
| :
|
|
FONYPONY7o7
¯
Member # 7208
|
posted
i got a kross member from ford recyling center but i took it home and measured them both and theyd lookd idenical
Posts: 26 | From: YAY AREA | Registered: Nov 2006
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
K-member is the same.
To be up to spec with a stock 5.0 you need to swap:
spindles, rotors, calipers, shocks, struts, rear end, rear brakes, rear brake line, master cylinder, brake booster, fuel lines, engine harness, computer, headlight harness, fuel pump relay, tachometer, springs, transmission crossmember/mount.
[ November 26, 2006, 05:01 PM: Message edited by: Blind ]
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
Stangs R Us
¯
Member # 4495
|
posted
And tha fuel pump also
Posts: 3100 | From: sacramento | Registered: Aug 2005
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
quote:
Originally posted by red GT black rallyes:
And tha fuel pump also
they are both rated to the same gallon per hour rate, I don't remember if the output of the lines is different, I swapped the gas tanks when I did the fuel lines on mine, donor car had a full tank and the 4cyl was empty...no brainer ![[Big Grin]](biggrin.gif)
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
