|
Author
|
Topic: 4.6 teksid block .020 over 8 bolt cobra crank, H beam rods, dished blower pistons
|
TOPnotch
¯
Member # 1340
|
posted
 
 
Got a complete built 4.6 short block. Short block has been completly disassembled and inspected. I was trying to sell it complete but could not vouch for the internal condition of all parts and didnt feel comfortable selling untill I knew exactly what I had.
4.6 aluminum teksid block .020 over, 8 bolt cobra crank, Mod Max H beam rods with arp 2000 bolts, Mod Max .020 over dished forged pistons with tool steel wrist pins. Initial inspection shows that all hard parts are in great shape. Crank has some minor grooves and a few bearings were showing a little wear. This shortblock is a great start to building a super stout bottom end. In a perfect world this motor should take a ring & bearing. Engine was not blown up and was only disassembled for inspection. $1500 for everyting all parts have been cleaned in a parts washer and are ready to go. Will also throw in a moroso T sump 10 qt oil pan.
(510) 755-3212 Chris
--------------------
The bitterness of poor quality remains long after the sweetness of low price is forgoten!!!
1QWKCHP
1QWKDRP
Posts: 2255 | From: Hayward | Registered: May 2002
| :
|
|
TOPnotch
¯
Member # 1340
|
posted
ttt
--------------------
The bitterness of poor quality remains long after the sweetness of low price is forgoten!!!
1QWKCHP
1QWKDRP
Posts: 2255 | From: Hayward | Registered: May 2002
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
