|
Author
|
Topic: Need an Engine Built? Call Dan(Turbo50) See Why Inside!
|
FivePTSlow
¯
Member # 7682
|
posted
 
 
First, I must say thank you to Dan(Turbo50) for making my engine happen. Without his skills and reasonable pricing I would still be sitting here looking at a Mustang with a motor that has no compression. His initial quote for the work was almost half of the least expensive machine shop I talked to. Not only that, but Dan has real world experience racing with Mustang 5.0's, so I would give him an edge over the machine shops.
Dan does top notch work period. He's also completely honest and no BS. He recommended to replace only stuff that needed replacing. Didn't try to up sell on a bunch of stuff that would not benefit my build to make more money. In fact, the motor I brought him was in pretty good condition(not the motor that lost compression as mentioned above). He actually told me that there was no need to rebuild it. How many shops would tell you that? None that I know of.
Dan also documented the entire process with photos. He sent me over 30 photos basically step by step of building the motor, all of the clearances etc. I would consider that a 100% real deal blueprinting of the build process. He also provided all receipts of parts purchased to complete the build and went out of his way to find a camshaft for me.
On top of all of that the build came in under budget!
What I'm trying to say here is that if you need top quality work done at reasonable prices you need not look any further than Dan Turbo50 for your engine building needs and more.
Here's only a few of the pictures he sent during the build process.
Here's a couple of pics after I got ahold of the long block from Dan:
--------------------
2011 GT/CS 5.0 + Boost(Procharger)
90 Bronco 5.8 Lifted
05 SRT-4 24PSI E-85 at least 50 million hp
07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
coupedup
¯
Member # 9987
|
posted
Nice stuff, should be lots of fun. A boulevard bruiser.
Posts: 4406 | From: Ca | Registered: May 2010
| :
|
|
Cstang5.0
¯
Member # 4925
|
posted
Dan is the man built my motor over 2 years ago and it's running like it did the first day.. ![[burnout]](graemlins/burnout.gif)
--------------------
88 VERT slow sold
89 coupe stock ; )
02 yukon
05 focus
Posts: 1638 | Registered: Oct 2004
| :
|
|
FivePTSlow
¯
Member # 7682
|
posted
quote:
Originally posted by Nifty50:
Nice stuff, should be lots of fun. A boulevard bruiser.
Thank you. Yeah, considering I went high 12's on stock h/c/i and a very tired old block with that old paxton... I have no doubts it's gonna run hard(mid low 11's).
--------------------
2011 GT/CS 5.0 + Boost(Procharger)
90 Bronco 5.8 Lifted
05 SRT-4 24PSI E-85 at least 50 million hp
07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
LSFairmont
¯
Member # 6001
|
posted
Dan, Dan, if he can't do it no one can!! ![[patriot]](graemlins/patriot.gif)
Posts: 3652 | From: the land of the lost | Registered: Sep 2005
| :
|
|
FivePTSlow
¯
Member # 7682
|
posted
quote:
Originally posted by Cstang5.0:
Dan is the man built my motor over 2 years ago and it's running like it did the first day..
Glad to hear it! This is my intermediate motor. I'm eventually going to have Dan build a Dart Block all forged stroker setup for me. But I needed something that will last up until that point. Since he has a lot of experience with engine building and has all of the right tools needed to do everything right I went with him instead of machine shops who could care less if they have my business of not.
--------------------
2011 GT/CS 5.0 + Boost(Procharger)
90 Bronco 5.8 Lifted
05 SRT-4 24PSI E-85 at least 50 million hp
07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
NICE! Hopefully one day he can build a dart for me but I first need to get the damn block lol
--------------------
-Savage Habits-
1992 Summer Edition
1986 Hatch- catfish killer
1964 Impala hard top
Posts: 18528 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
FivePTSlow
¯
Member # 7682
|
posted
quote:
Originally posted by NEIGHT:
NICE! Hopefully one day he can build a dart for me but I first need to get the damn block lol
Dan can get Dart blocks. As a result of this I will most likely be building one earlier than I originally thought.
--------------------
2011 GT/CS 5.0 + Boost(Procharger)
90 Bronco 5.8 Lifted
05 SRT-4 24PSI E-85 at least 50 million hp
07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
turbo50
¯
Member # 6700
|
posted
Ahhhhhhhhhhh
What can I say other than thanks??
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
FivePTSlow
¯
Member # 7682
|
posted
quote:
Originally posted by turbo50:
Ahhhhhhhhhhh
What can I say other than thanks??
You can say that you will come install my heater core for me ![[Smile]](smile.gif) haha
--------------------
2011 GT/CS 5.0 + Boost(Procharger)
90 Bronco 5.8 Lifted
05 SRT-4 24PSI E-85 at least 50 million hp
07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
FivePTSlow
¯
Member # 7682
|
posted
I also forgot to mention that Dan answered every single question that I had without hesitation/frustration. This was during the entire build process. Meaning while he was building the long block, I was installing all the rest of the stuff, while I was dropping in the motor, after the motor was dropped in and started, and even after driving it around... even today more questions, more answers. Customer service is far beyond what you would see at any machine shop. Plus most machine shops wouldn't have any idea on how to properly set it up once its dropped in. Try calling them up to ask how to set up this or that or what torque this bolt or that bolt is after you've already got your motor from them.
--------------------
2011 GT/CS 5.0 + Boost(Procharger)
90 Bronco 5.8 Lifted
05 SRT-4 24PSI E-85 at least 50 million hp
07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
FivePTSlow
¯
Member # 7682
|
posted
Here's a video link to the first fire up. This motor first right up with no problems at all the very first time!
http://youtu.be/KZOxoxqDeiQ
--------------------
2011 GT/CS 5.0 + Boost(Procharger)
90 Bronco 5.8 Lifted
05 SRT-4 24PSI E-85 at least 50 million hp
07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
SLOWSN95
¯
Member # 8269
|
posted
I've talked to Dan a couple times thru PM and know many people with a motor built by him. Very knowledgeable guy and a great person to have your motor built by.
--------------------
94' GT
347 Stroker
MM Suspended
2003 SB SVT Lightning
Pullied and Lowered
89'Hatch-SOLD
Posts: 2214 | From: 510/east bay | Registered: Mar 2008
| :
|
|
ISP89LX
¯
Member # 8949
|
posted
Very nice build man. I'm deff looking forward to having my engine done soon as we'll from Dan. What are the specs? Looks like something similar I wanna put together.
--------------------
89LX
Turbo50built!!!
Wait, he jacked my shit!!!
"Dan will make It rite" THIEF!
Posts: 2997 | From: Nowhere to be found. | Registered: Feb 2009
| :
|
|
FivePTSlow
¯
Member # 7682
|
posted
quote:
Originally posted by ISP89LX:
Very nice build man. I'm deff looking forward to having my engine done soon as we'll from Dan. What are the specs? Looks like something similar I wanna put together.
Rebuilt 1991 block. Had 103k miles when we pulled it, so it was in great shape.
Paxton SN2000 8psi
PMASS 90mm maf
UPR Boostmaster 4" Inlet Piping
Paxton 3" Outlet Pipe
70mm BBK Throttle Body/Spacer
Holley Systemax II Intake Manifold
SN95 Fuel Rails
Ford Green Top 42lb/hour Injectors
Trick Flow O Ringed Twisted Wedge 170cc Heads
Ford F Cam
ARP Head Bolts
BBK Shorty Non Equal Length Headers
Stock H Pipe
Flowmaster Delta 40's
MSD 6al, Blaster Coil, & cap/rotor
3924 Plugs gapped @ .032
Trick Flow Valve Covers
Ford Racing Wires
Pro Products Balancer
A/C P/S, all Smog stuff in tact etc
--------------------
2011 GT/CS 5.0 + Boost(Procharger)
90 Bronco 5.8 Lifted
05 SRT-4 24PSI E-85 at least 50 million hp
07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
quote:
Originally posted by CornOil_&_Boost:
wait...Turbo50 Dan builds engines?????
news to me too
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
FivePTSlow
¯
Member # 7682
|
posted
quote:
Originally posted by CornOil_&_Boost:
wait...Turbo50 Dan builds engines?????
news to me as well
--------------------
2011 GT/CS 5.0 + Boost(Procharger)
90 Bronco 5.8 Lifted
05 SRT-4 24PSI E-85 at least 50 million hp
07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
MADMAVERICK
¯
Member # 10959
|
posted
DAN BUILT MY MOTOR AND STILL RUNNING TOUGH
YOU THE MAN ! DAN
--------------------
1971 MAVERICK grabber
1962 ranchero
2017 MUSTANG ECHOBOOST
2017 FORD ESCAPE
2005 ROADKING
2005 DODGE RAM
Posts: 70 | From: vacaville | Registered: May 2011
| :
|
|
trickflow211
¯
Member # 8503
|
posted
+1 for Dan probably the most honest/Trustworthy guy on this board ! An his work is the best !
--------------------
1990 Cobra Clone 421 Tq 420 Hp
Need General Contractor Services? 925-338-5422 serving East Bay Area over 20yrs
Posts: 2449 | From: Pittsburg/Sacramento | Registered: Jul 2008
| :
|
|
LSFairmont
¯
Member # 6001
|
posted
quote:
Originally posted by FivePTSlow:
Here's a video link to the first fire up. This motor first right up with no problems at all the very first time!
http://youtu.be/KZOxoxqDeiQ
damn, was that filmed back in the 90's?
Posts: 3652 | From: the land of the lost | Registered: Sep 2005
| :
|
|
LETHL 03
¯
Member # 5401
|
posted
quote:
Originally posted by 5Porn0:
Dan, Dan, if he can't do it no one can!!
Cuz dan said so and i believe him lol
--------------------
RIP Willie Guzman LQ9SN95
Hard Head Muscle
#HHM #babydickcobra #lethl03
Posts: 4128 | From: 702 HHM | Registered: Feb 2005
| :
|
|
FivePTSlow
¯
Member # 7682
|
posted
quote:
Originally posted by 5Porn0:
quote:
Originally posted by FivePTSlow:
Here's a video link to the first fire up. This motor first right up with no problems at all the very first time!
http://youtu.be/KZOxoxqDeiQ
damn, was that filmed back in the 90's?
Nope just a couple days ago
--------------------
2011 GT/CS 5.0 + Boost(Procharger)
90 Bronco 5.8 Lifted
05 SRT-4 24PSI E-85 at least 50 million hp
07 Harley VROD NRS Stage 1
Posts: 1857 | From: Sacramento | Registered: May 2007
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
Dan is a badass, I can't wait to get my motor in and running!
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
1993lx50
¯
Member # 10246
|
posted
Dans the only way to go when u want some serious hp #s!!
Posts: 767 | Registered: Aug 2010
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
