This is topic 79-04 Mustang Full Length Subframe Connectors$320parts and labor in forum Vendor's FOR SALE Section at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=9;t=000310

---

Posted by iron50 (Member # 11231) on :
 
79-04 Mustang Full Length Subframe Connectors
These 2" x 2".or 1 1/2 x 2". full length subframe connectors are ideal for your daily driver or high horsepower race car.
Made from 2" x 2"or 1/12 x 2 " Mild Steel

Weld in Installation


[ May 30, 2012, 05:38 AM: Message edited by: iron50 ]
 

---

Posted by iron50 (Member # 11231) on :
 

 

---

Posted by iron50 (Member # 11231) on :
 

 

---

Posted by Mach 5oh (Member # 9497) on :
 
Are you making, and installing these or are you just selling a set and installing them?
 

---

Posted by SydeWaySix (Member # 3596) on :
 

quote:

---

Originally posted by Mach 5oh:
Are you making, and installing these or are you just selling a set and installing them?

---

he makes and installs them

If I didnt already have mine he'd be welding some on my car right now!
 

---

Posted by cali95gt (Member # 8940) on :
 
I'm going to have to get this done.. However how do you load the suspension before you weld them? From what I've been told, roll on lifts are best...
 

---

Posted by 5.0 LsX (Member # 10017) on :
 
hell of a deal, and the seat braces make a big difference!
 

---

Posted by Duncan Motors (Member # 7045) on :
 
u cant even buy these stly sub frame for that cost. then normal labor to weld these in would still cost more than his total bill. better jump on this deal before he changes his prices later! one hell of a deal. i charge at least 200 just to weld these in. and he knows better than to weld these in on that stle lift. the 2 by 2 square tubing gets close to the ground if your car is super lowered tho. gets tight to slide a floor jack under sometimes.
 

---

Posted by v-town coupe (Member # 2771) on :
 
^^^yeah I'll 2nd that.$200 for parts and labor is real cheap!
 

---

Posted by dvuspny (Member # 10949) on :
 
Johnathan; you are always welcome to use my drive on rack to weld suspension mods and sub-frame connectors on!!! Lemme know. TTT........
 

---

Posted by Boss 327 (Member # 9143) on :
 
What about for the 96-98 cobras?
 

---

Posted by Big block 66 f100 (Member # 8867) on :
 
Can you make tubular subframes?
 

---

Posted by Mach 5oh (Member # 9497) on :
 
This is a nice fuggin deal. I need to find 200 dollars and a job.
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by dvuspny:
Johnathan; you are always welcome to use my drive on rack to weld suspension mods and sub-frame connectors on!!! Lemme know. TTT........

---

Thanks bro!
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by Mach 5oh:
This is a nice fuggin deal. I need to find 200 dollars and a job.

---

Lol!
 

---

Posted by Sickgt03hd (Member # 9313) on :
 

quote:

---

Originally posted by cali95gt:
I'm going to have to get this done.. However how do you load the suspension before you weld them? From what I've been told, roll on lifts are best...

---

Any time bro just give us a call this is what we use, a ramp


 

---

Posted by Big block 66 f100 (Member # 8867) on :
 

quote:

---

Originally posted by Big block 66 f100:
Can you make tubular subframes?

---

quote:

---

Originally posted by Big block 66 f100:

quote:

---

Originally posted by Big block 66 f100:
Can you make tubular subframes?

---

No answer for my question?

---

quote:

---

Originally posted by Big block 66 f100:
I don't know what size I need but I like tubular over flat subframes... but soon as I put this motor in next week I'll be getting my subframes or my torque boxes reinforced...

---

quote:

---

Originally posted by Boss 327:
What about for the 96-98 cobras?

---

PM sent
 

---

Posted by SydeWaySix (Member # 3596) on :
 

quote:

---

Originally posted by Boss 327:
What about for the 96-98 cobras?

---

79-04 are all the same. Although, these guys can fab whatever you need if they are different. Give them a call and they'll set you up!

F.O.D. FTMFW
 

---

Posted by Boss 327 (Member # 9143) on :
 

quote:

---

Originally posted by SydeWaySix:

quote:

---

Originally posted by Boss 327:
What about for the 96-98 cobras?

---

79-04 are all the same. Although, these guys can fab whatever you need if they are different. Give them a call and they'll set you up!

F.O.D. FTMFW

---

quote:

---

Originally posted by Boss 327:

quote:

---

Originally posted by SydeWaySix:

quote:

---

Originally posted by Boss 327:
What about for the 96-98 cobras?

---

79-04 are all the same. Although, these guys can fab whatever you need if they are different. Give them a call and they'll set you up!

F.O.D. FTMFW

---

No there not. The 96-98 cobras have a unique transmission mount which prevents from having full length subframe connectors unless you do some extensive grinding on the mount.

---

I dont know, but i have a 98 cobra and have MM's flsc's on my car and i dont recall them being 96-98 cobra specific
 

---

Posted by Boss 327 (Member # 9143) on :
 

quote:

---

Originally posted by SydeWaySix:

quote:

---

Originally posted by Boss 327:

quote:

---

Originally posted by SydeWaySix:

quote:

---

Originally posted by Boss 327:
What about for the 96-98 cobras?

---

79-04 are all the same. Although, these guys can fab whatever you need if they are different. Give them a call and they'll set you up!

F.O.D. FTMFW

---

No there not. The 96-98 cobras have a unique transmission mount which prevents from having full length subframe connectors unless you do some extensive grinding on the mount.

---

I dont know, but i have a 98 cobra and have MM's flsc's on my car and i dont recall them being 96-98 cobra specific

---

quote:

---

Originally posted by Boss 327:

quote:

---

Originally posted by SydeWaySix:

quote:

---

Originally posted by Boss 327:

quote:

---

Originally posted by SydeWaySix:

quote:

---

Originally posted by Boss 327:
What about for the 96-98 cobras?

---

79-04 are all the same. Although, these guys can fab whatever you need if they are different. Give them a call and they'll set you up!

F.O.D. FTMFW

---

No there not. The 96-98 cobras have a unique transmission mount which prevents from having full length subframe connectors unless you do some extensive grinding on the mount.

---

I dont know, but i have a 98 cobra and have MM's flsc's on my car and i dont recall them being 96-98 cobra specific

---

Heres from MM's web site:

"1996-98 Mustang Cobra Installation Note
These three years of the Cobra model require modifications to the transmission crossmember mounting flanges. Look at our consumer instructions for more details about installing full-length subframe connectors on these Cobras."

---

got it! never knew that. i guess my installer did the required modificayions when he installed them.

TTT for these $200 subframes! they'll make it work on whatever car you have
 

---

Posted by Sickgt03hd (Member # 9313) on :
 
There is nothing to be worry about, we have Autodesk Inventor Professional 2012, Robot Structural Analysis Professional 2012, Mechanical Desktop 2010 and Autocad full system 2012, as you can see we can even make the 3D drawing of the whole car frame and run a Finite Element Analysis (FEA) to verify any stress and strain in the frame and the weld, is this enough for you?, i hope that you know what is all this software about.
F.O.D.
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by Sickgt03hd:
There is nothing to be worry about, we have Autodesk Inventor Professional 2012, Robot Structural Analysis Professional 2012, Mechanical Desktop 2010 and Autocad full system 2012, as you can see we can even make the 3D drawing of the whole car frame and run a Finite Element Analysis (FEA) to verify any stress and strain in the frame and the weld, is this enough for you?, i hope that you know what is all this software about.
F.O.D.

---

+1 F.O.D
 

---

Posted by norcalstangman (Member # 8387) on :
 
I wanna say that Jonathan began doing some work. He is a very detailed guy. Perfection is all he does. I'm in process of doing thru subframe connectors along with a custom 6 point roll cage. . My car had More repairing than expected from the torque boxes and floor board and so on. He always called me everytime he found Something. I like the fact that he did not continue the work till he called me and had my ok to go ahead and repair it. Also I like that he gave me suggestions and ideas for repairs and cage mods. I'm glad that I'm doing business with him. Great prices great work great staff. Highly suggest him for fab work.

TTT FOR HIM
 

---

Posted by Boss 327 (Member # 9143) on :
 

quote:

---

Originally posted by Sickgt03hd:
There is nothing to be worry about, we have Autodesk Inventor Professional 2012, Robot Structural Analysis Professional 2012, Mechanical Desktop 2010 and Autocad full system 2012, as you can see we can even make the 3D drawing of the whole car frame and run a Finite Element Analysis (FEA) to verify any stress and strain in the frame and the weld, is this enough for you?, i hope that you know what is all this software about.
F.O.D.

---

 

---

Posted by LETHL 03 (Member # 5401) on :
 
You'll be seeing my car soon
 

---

Posted by SydeWaySix (Member # 3596) on :
 

quote:

---

Originally posted by norcalstangman:
I wanna say that Jonathan began doing some work. He is a very detailed guy. Perfection is all he does. I'm in process of doing thru subframe connectors along with a custom 6 point roll cage. . My car had More repairing than expected from the torque boxes and floor board and so on. He always called me everytime he found Something. I like the fact that he did not continue the work till he called me and had my ok to go ahead and repair it. Also I like that he gave me suggestions and ideas for repairs and cage mods. I'm glad that I'm doing business with him. Great prices great work great staff. Highly suggest him for fab work.

TTT FOR HIM

---

+1000...John and mitch are installing my MM 4-pt right now and although these pre-made roll bars from MM are known to be good as-is, they've found ways to improve it. As stated above, theyve always called me for approval before "just doing it." They definitely know what they're doing and respect you as the owner of the car and watch out for your best interest. I don't trust my car withany people but these guys know what they're doing.

**only reason why I bought an MM roll bar over having them make me one is because i got a really good deal on it. Otherwise they'd be fabbing mine up as well.**

TTT for F.O.D.


 

---

Posted by SydeWaySix (Member # 3596) on :
 
TTT
 

---

Posted by amrit510 (Member # 11311) on :
 
where are you located? looking to get some on my 01 gt
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by amrit510:
where are you located? looking to get some on my 01 gt

---

Richmond
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
TTt
 

---

Posted by dvuspny (Member # 10949) on :
 
Hellooooo! !!!!! ....TTT...TTT....TTT
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by dvuspny (Member # 10949) on :
 
TTT. ....TTT......TTT
 

---

Posted by Ryn621 (Member # 11276) on :
 
Would you still be doing this next month and how much for a roll cage 97gt convertable
 

---

Posted by Sickgt03hd (Member # 9313) on :
 

quote:

---

Originally posted by Ryn621:
Would you still be doing this next month and how much for a roll cage 97gt convertable

---

Yeah just give us a call, about the roll cage there is a lot of factors involve in a roll cage but give us a call or stop by the shop at any time and we'll explain them to you.
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by dvuspny (Member # 10949) on :
 
TTT......you just can't compete with prices for this pro quality fabrication products.....bad ass!!!! TTT...TTT...TTT...........
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by jaehow23 (Member # 11230) on :
 
How long does the install usually take from start-finish?
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by dvuspny (Member # 10949) on :
 
TTT.TTT.TTT. ..........Johnathan. .....I have customers out this way that need nd want Subframe connectors welded on for sure! USE MY RACK IF YOU WANT!!!! .... IT WILL SAVE SOME PEOPLE THE TRIP THAT THEY SAY IS THE REASON THEY CAN'T GET IT DONE. maybe make a post for people that are in this area and want them installed.
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by dvuspny:
TTT.TTT.TTT. ..........Johnathan. .....I have customers out this way that need nd want Subframe connectors welded on for sure! USE MY RACK IF YOU WANT!!!! .... IT WILL SAVE SOME PEOPLE THE TRIP THAT THEY SAY IS THE REASON THEY CAN'T GET IT DONE. maybe make a post for people that are in this area and want them installed.

---

h for sure bro i call you tomorrow thanks bro
 

---

Posted by LETHL 03 (Member # 5401) on :
 
My cobra should be in your shop by next Monday
 

---

Posted by iron50 (Member # 11231) on :
 
pm sent
 

---

Posted by 70stang351w (Member # 9948) on :
 

quote:

---

Originally posted by norcalstangman:
I'm in process of doing thru subframe connectors along with a custom 6 point roll cage. .

---

quote:

---

Originally posted by 8lbCoupe:
What's the price to include the through the the floor kind also

---

quote:

---

Originally posted by 70stang351w:

quote:

---

Originally posted by 8lbCoupe:
What's the price to include the through the the floor kind also

---

+1

---

yes sir you can see my work on facebook... smoothline81@yahoo.com Jonathan Lemoine

[ February 05, 2012, 04:38 PM: Message edited by: iron50 ]
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by 8lbCoupe:
What's the price to include the through the the floor kind also

---

$240 for the full length subframe connectors and for $350 for the weld through floor call me for more info
510 837 4856

[ February 05, 2012, 04:41 PM: Message edited by: iron50 ]
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by dvuspny (Member # 10949) on :
 
TTT.....

[ February 11, 2012, 10:41 PM: Message edited by: dvuspny ]
 

---

Posted by SLOWFOX (Member # 11067) on :
 
Ill hit you on friday bro am excited to finally get my suspension fixed lol.
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by SLOWFOX:
Ill hit you on friday bro am excited to finally get my suspension fixed lol.

---

Sure man anytime.....it was great meeting you guys! Tell your friend not to be depressed about his car.
 

---

Posted by 8lbCoupe (Member # 11416) on :
 
Any pics of the through the floor subframes wit the carpet put back in??
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by 8lbCoupe:
Any pics of the through the floor subframes wit the carpet put back in??

---

you can see my work on facebook... smoothline81@yahoo.com Jonathan Lemoine
 

---

Posted by triple b (Member # 8763) on :
 
add me i want to check out more of your wrk
 

---

Posted by KCmustangboy (Member # 1927) on :
 
I am excited, I left my 98 cobra yesterday and get to pick it up after work today. Can't wait to feel the difference and check out the work underneath.
 

---

Posted by KCmustangboy (Member # 1927) on :
 
So I wanted to throw up a follow up post on here about the work I had done. First off I have to say THANK YOU to Johnathan and his partner. Custom fitting and building stuff like this is TIME consuming. The work done on my car was above what I expected and honestly, under priced. I know eventually his prices will go up and that's okay because the work that he does is very good. Fitting, and refitting to get everything just right and not using some cheap ass pencil thin steel. I am completely satisfied and the car feels amazing now. HIGHLY RECOMMEND using these guys to have any sub frame or torque box stuff you need done. And I am sure they can do lots of other work too. I have had 7 mustangs, sub frame connectors put in 4 of them. I have bought the cheap shity ones and had them welded in, and I have had good ones put it. With that being said anytime you try going to someone new you never know what kind of experience and quality of work you are going to get. Just really happy and will gladly drive my car the extra distance to have these guys do the work. Thanks again.


 

---

Posted by iron50 (Member # 11231) on :
 
Thanks for your post! It was great meeting you and we are glad that you were satisfied with our work. We hope to be able to serve you again!
 

---

Posted by 8lbCoupe (Member # 11416) on :
 
I browsed your fb page and could t find any pics of the through the floor connectors with the carpet re installed could u possibly post some pics Here??
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by 8lbCoupe:
I browsed your fb page and could t find any pics of the through the floor connectors with the carpet re installed could u possibly post some pics Here??

---

Sorry man I dont have any but next time I do that work I will make sure to post some pics.
 

---

Posted by iron50 (Member # 11231) on :
 
ttt
 

---

Posted by dvuspny (Member # 10949) on :
 
TTT
 

---

Posted by iron50 (Member # 11231) on :
 
ttt
 

---

Posted by 84SVOrick (Member # 9039) on :
 
pm sent
 

---

Posted by dvuspny (Member # 10949) on :
 
TTT.....F.O.D.
 

---

Posted by 707clone (Member # 10342) on :
 
just dropped off my bucket at f.o.d and cant wait to see an feel the difference with good torque boxes an thru floor sub frames.
 

---

Posted by V3T HNTR (Member # 11618) on :
 
Wish i would have seen this earlier!! Just ordered some MM full length subframes
 

---

Posted by 707clone (Member # 10342) on :
 

quote:

---

Originally posted by V3T HNTR:
Wish i would have seen this earlier!! Just ordered some MM full length subframes

---

cancel your order bro~
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
ttt
 

---

Posted by autumnstang97 (Member # 6111) on :
 
Are you mobile by chance?
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by autumnstang97:
Are you mobile by chance?

---

quote:

---

Originally posted by autumnstang97:
Once I get the car running I'll set up a meet with ya...thanks bro

---

for sure bro
 

---

Posted by iron50 (Member # 11231) on :
 
Up
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by SEV7NS91GT (Member # 11694) on :
 
WHAT IF I ALREADY HAVE THE SUBFRAME?
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
ttt
 

---

Posted by NEIGHT (Member # 8741) on :
 
Damn I wanna get my subframes done but I'd only be able to go over there on a weekend. How long does it take?
 

---

Posted by Sickgt03hd (Member # 9313) on :
 

quote:

---

Originally posted by NEIGHT:
Damn I wanna get my subframes done but I'd only be able to go over there on a weekend. How long does it take?

---

Hey bro call us tomorrow and we can set something up
Jonathan:510-837-4856
Michael:510-228-7940
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by tlcluver21 (Member # 9062) on :
 
Will you weld in subframes if we already have them or shall I try to sale out right and go that way?
 

---

Posted by dvuspny (Member # 10949) on :
 
Johnathan; when are you gonna come thru?
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by dvuspny:
Johnathan; when are you gonna come thru?

---

I'm very busy for the next few weeks!but when I have free time I'll call you!
we are working from Monday to Sunday thanks
 

---

Posted by iron50 (Member # 11231) on :
 

 

---

Posted by iron50 (Member # 11231) on :
 
ttt
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by SnakeForce (Member # 9313) on :
 
F.O.D
T
T
T
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
ttt
 

---

Posted by iron50 (Member # 11231) on :
 

 

---

Posted by iron50 (Member # 11231) on :
 

 

---

Posted by fredfifty (Member # 10320) on :
 
looks solid!! i need to do this, damn! so many roadblocks though lol
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by fredfifty:
looks solid!! i need to do this, damn! so many roadblocks though lol

---

 

---

Posted by coupe5oh (Member # 10411) on :
 
i thought the shop was gettin closed down for like 3 months or somethin
 

---

Posted by iron50 (Member # 11231) on :
 

quote:

---

Originally posted by coupe5oh:
i thought the shop was gettin closed down for like 3 months or somethin

---

Yes sir I only. Open. Friday. And Saturday. By. Appointment
 

---

Posted by iron50 (Member # 11231) on :
 
Ttt
 

---

Posted by iron50 (Member # 11231) on :
 
Up
 

---

Posted by Bulkster90 (Member # 11621) on :
 
if i already have the sfc how much to install them?
 

---