This is topic Correction with Detail Addict G-Series in forum Vendor's FOR SALE Section at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=9;t=000236

---

Posted by DetailAddict (Member # 8890) on :
 
2006 S2000 Laguna Blue
Engine

- Stock F22C with USDM F20C Pistons
- F20C Cams
- Kraftwerks Supercharger producing 381hp 242tq
- Hondata Kpro Dual Adapter ECU
- BlackTrax Fuel Return System
- Aeromotive FPR
- Walbro 255 Fuel Pump
- Spoon Engine Damper

Transmission

- Stock Transmission
- BT Custom Profile Stage 3 Clutch
- ACT Prolite Flywheel

Suspension/Wheels/Tires

- Spoon Front Upper Strut Bar
- JRZ RS-Pro 2-Way Suspension
- Swift 20kg springs
- Gendron Front Adjustable Sway Bar
- BT Front and Rear Bumpsteer Kits
- Toyo R888 Tires
- Wheels: 17x9 Black Enkei RPF1 and Magnesium Blue Volk CE28N wheels

Exhaust

- Test Pipe
- Invida Dual Cat Back Exhaust

Exterior

- Custom Carbon/Blue Kevlar Hood
- Seibon Extended CF Fenders
- Voltex Type II CF Wing
- OEM Hardtop
- Clear Bra by Omega Tintwerks

Interior

- JDM Center Console
- JDM Ebrake (located to driver side)
- BT Shift Knob
- Momo Corse Steering Wheel
- Brde GIAS Carbon/Kevlar Seat

This is a track car from BlackTrax Performance in Milpitas. They decided to give it a good buff after a recent track day.
Since this is a track car, we decided not to go with a 100% correction, but with G-1500, G-3500, and spot correction with G-1000, we achieved a lot of correction !
Here are couple of before shots...





They saved a little something something for me...

We started with the wheels and tires first with our Engine+Wheel Cleaner

Aggitate it a little with a soft brush

 

---

Posted by DetailAddict (Member # 8890) on :
 
Crazy amount of brake dust, so we tackle the inside with our ACE TurboStick

With our Water Softening System and pressure washer setup, we went with our super concentrated Car Soap + Camspray Foamgun for maximum sud action!

With setting little under halfway, this is the kind of foam action we get!



With only this much of soap

And the rest is all water!

 

---

Posted by DetailAddict (Member # 8890) on :
 
After just a quick wash



Get right to clay bar after the wash


 

---

Posted by DetailAddict (Member # 8890) on :
 
After a quick rinse we check out the paint condition





We started off with G-1500 Polish and it was able to take care of most of the area. There were some trouble spots that we had to start with G-1000



 

---

Posted by DetailAddict (Member # 8890) on :
 
Took a little break from the exterior and worked on the carpets a bit with our Carpet Cleaner

Pretty bad shape... and very worn on the driver side

All we did was spray and rub and wipe off with some microfiber towels

There is only one OEM seat in there, but we gave it a good clean and condition anyway

With just single pass of our Leather Cleaner and Leather Conditioner


Back to the paint and gave it another polish with our G-3500 Polish the follow up with our Carnauba Wax

 

---

Posted by DetailAddict (Member # 8890) on :
 
It was geting dark QUICK! Here are the front and rear photos


 

---

Posted by SVTCOBRAFOREVER (Member # 4173) on :
 
Very Impressive. Great Job!
 

---

Posted by East Bay 50 (Member # 8081) on :
 
How much would something like that cost to have done?
 

---

Posted by DetailAddict (Member # 8890) on :
 
packages like this one is usually customized. This one right here is $500 with primary focus on exterior paint correction.
 

---

Posted by F1R/GT (Member # 7404) on :
 
Do we have to take the car to you or do you come to us?
 

---

Posted by DetailAddict (Member # 8890) on :
 
unfortunately you would have to come to my shop... I mean, just the wash alone, i have water softener and hot water setup, which i can't bring.

It does take the ENTIRE day for this job and could be longer if condition is worse. LMK what you have in mind!

Leo

quote:

---

Originally posted by F1R/GT:
Do we have to take the car to you or do you come to us?

---