This is topic 6-point special for April for FOX bodies in forum Vendor's FOR SALE Section at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=9;t=000144

---

Posted by SPEC -Fabrication (Member # 4980) on :
 
We are going to run a special on 6 point cage's for the month of april, This will include,1 main hoop, 2 front diagonals, and 2 rear diagonals + Mid bar for use with seat belts, We will also throw in 2 more Bars that tie into the transmission tunnell at customers request. Bring us the car complete for $650 Hatch or coupe. This is normally our regular price if the customer pulls the interior. Pm me to set a date.

[ February 28, 2006, 11:12 PM: Message edited by: SPEC -Fabrication ]
 

---

Posted by cvr 5.0 (Member # 2962) on :
 
convertibles???

[ March 01, 2006, 12:18 AM: Message edited by: cvr 5.0 ]
 

---

Posted by 93cobracoupestang (Member # 5765) on :
 
is this special starting in april? or has it started until april?
 

---

Posted by two-gun kid (Member # 5891) on :
 

quote:

---

We will also throw in 2 more Bars that tie into the transmission tunnell at customers request.

---

do you have pic of these look like?
 

---

Posted by SPEC -Fabrication (Member # 4980) on :
 
YES converts too, I will take soem pics of the most recent FOX we are finishing up This one I did some custom rocker panel bars, they go on the inside of the rocker (bottom of door)going along to the front diagonal to the main hoop, Just helps the subsframe alittle more

I lost a huge folder of pics of cages I have done when my hardrive crashed

Here is a pic of a 57 I Fabbed up the mini tubbs from scratch because no one makes a good steal kit.



468 CBB=540hp , 4 link rear, 9", 20x12 wheels with 325x35x20's custom wheels 1 of a kind.
 

---

Posted by SPEC -Fabrication (Member # 4980) on :
 
yes starts in April , moving to a bigger newer shop.

The 57 also has air ride on it , thats the reason of it laying down to one side.





[ March 01, 2006, 01:28 AM: Message edited by: SPEC -Fabrication ]
 

---