This is topic Rocketeer Performance Follow-up in forum Vendor's FOR SALE Section at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=9;t=000086
Posted by rocketeerperf (Member # 5787) on :
 
This is a follow up to my intro post in the General Talk section.

We are a local distributor for Wilwood brake kits and custom brake kits using Wilwood components for most major manufacturers but of course also Fords. I will be bringing some kits with me to show at this weekends Hayward meet. Here's a sneak peek at the 05 Mustang 14" front kit I'll be showing...

-

[ June 21, 2005, 10:33 PM: Message edited by: rocketeerperf ]
 
Posted by two-gun kid (Member # 5325) on :
 
i saw on your website that you have all of the generations except the foxbody brake kits, will you be selling those?
 
Posted by rocketeerperf (Member # 5787) on :
 
Yes, I offer the fox bodied kits as well. I'm hard pressed to get all the kits on the website. There are so many that we offer and time is always at a premium. However, you will be seeing the fox bodied kits on the site in the next day or so. What size rotor are you interested in? What sized wheels do you run/want to run?

John.
 
Posted by two-gun kid (Member # 5325) on :
 
13in front rotors and 2 or 4 piston calipers.
looking for some good brakes that i know i will stop.
 
Posted by Mach0ne351 (Member # 927) on :
 
im looking into 14" brakes one day [Smile] just need to be in my price range...they can be BANK!

marek
 
Posted by rocketeerperf (Member # 5787) on :
 
Right now, the only kit we offer for the 87's+ is the Wilwood manufactured kit which uses a 10.75" rotor. That retails for ~$725.

We can create a 13" kit that would be identical to the rest that we offer. 325mm curved vane rotors either plain, drilled, slotted or drilled & slotted, Aluminum Anodized (your choice of color) rotor hats, Dynalite 4 piston calipers that are specifically matched to the stock Master Cylinder (black), your choice of pads, stainless hoses, all brackets etc. Basically everything you would need except for fluid for $1199. I would need 3 people to commit to such a kit to offset the development cost. Otherwise it gets too expensive for just one kit unless you have a lot of extra cash laying around ;-). If I get 3 people to commit to a kit I would incude the Wilwood brake fluid as well.

Keep in mind that the kits that we create are matched to your Master Cylinder. Kits that use off-the-shelf components from other cars can't do that so you won't get the same level of effectiveness as the custom kits can offer.

--------

Hey Marek, give me a call. I left you my number via e-mail.

JC
 
Posted by Mach0ne351 (Member # 927) on :
 
ya dude, ive just be slammmed with work. ill give ya a call today.....sorry about that...

marek
 
Posted by SteedaGT (Member # 2805) on :
 
One of those kits would look killer on my 99 Cobra for SEMA!
 
Posted by rocketeerperf (Member # 5787) on :
 
They look good on most any car at SEMA [Wink]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com