A couple new products @ APEX! - Northern California Ford Owners

This is topic A couple new products @ APEX! in forum Vendor's FOR SALE Section at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=9;t=000017

Posted by Bill/APEX Motorsports (Member # 636) on :

I just got in a shipment the following new products:
STEEDA '03 COBRA BLOWER BELT TENSIONER

Creates more belt wrap around blower pulley, for less belt slip with smaller pulleys and higher boost applications. Comes with OEM pulley, all hardware and bracket to mount to engine. Only $107.96 with CAFords discount! (reg. $119.95)
****************************
ACCUFAB '03 COBRA THROTTLE BODY AND POWER INLET

We've seen excellent hp gains and much crisper throttle response with this billet aluminum Accufab oval throttle body and Power Inlet. Easy installation--no grinding or porting necessary! Available satin or polished. $550.95 (satin) and $569.95 (polished) with CAFords discount.
****************************
CARTEL RACING BRAKE FLUID

We recommend Cartel brake fluid for all our street and racing customers! With a dry boiling point of 570 Degrees Fahrenheit, this brake fluid was specifically designed to meet the extreme conditions found in professional competition. Developed over three years of laboratory and field testing, significantly improved corrosion resistance helps this fluid meet the ever increasing demands placed on racing brake systems. 12oz. plastic container. Only $8.06/container with CAFords discount! (reg. $8.95)
*******************************
For more information on these or any other products we carry, please call, PM, or bill@apexmotorsports.com !
[burnout]

Posted by WantedCOBRA (Member # 3150) on :

Sorry to be off topic but do you carry Bassani headers for a 94-95 Cobra? If so, how much for a set of ceramic caoted headers?

Posted by Bill/APEX Motorsports (Member # 636) on :

I actually prefer the Ford Motorsport headers, which are $336. They're stainless steel and ceramic coated, lifetime warranty.
We also carry our zinc-coated header bolts with SurLock washers--won't back off! They're only $22.46 a set with your CAFords discount.

Posted by 94gt (Member # 3060) on :

what do you have in the way of cat-back exhaust?
Im looking mainly for something with turndowns, prefer MAC setup.
Thanks!

Posted by Bill/APEX Motorsports (Member # 636) on :

quote:
Originally posted by 94gt:
what do you have in the way of cat-back exhaust?
Im looking mainly for something with turndowns, prefer MAC setup.
Thanks!

I don't sell MAC products because their quality isn't up to my expectations.
I don't have any cat-backs that are sold as turn-downs, only ones with complete tailpips. I carry Bassani products.

Posted by 1Sicgt (Member # 714) on :

Is this special still going? Also can you work us a deal on 2.8 pulley, flip-chip, tune, TB and inlet, tensioner pulley, bassani mid-lengths with catted x. Send me a PM. I am dead serious too. Car should be broken in, in a week or so, then we are going wild. Also you got a hook-up on a full cage install? 12pt.??? Another question, any IRS beef up mods available?

Posted by SteedaGT (Member # 2805) on :

What about the throttle body set up and pully for the 03 harley truck? also changing the lower crank pully to a 10 inch

[ September 22, 2003, 08:44 PM: Message edited by: SteedaGT ]

Posted by 4.6 EATIN GM'S (Member # 1633) on :

quote:
Originally posted by Bill/APEX Motorsports:
I actually prefer the Ford Motorsport headers, which are $336. They're stainless steel and ceramic coated, lifetime warranty.
We also carry our zinc-coated header bolts with SurLock washers--won't back off! They're only $22.46 a set with your CAFords discount.

hey i need some new bolts do u ship? if so im really interested

Posted by Bill/APEX Motorsports (Member # 636) on :

quote:
Originally posted by 1Sicgt:
Is this special still going? Also can you work us a deal on 2.8 pulley, flip-chip, tune, TB and inlet, tensioner pulley, bassani mid-lengths with catted x. Send me a PM. I am dead serious too. Car should be broken in, in a week or so, then we are going wild. Also you got a hook-up on a full cage install? 12pt.??? Another question, any IRS beef up mods available?

Wow, lots of questions! Email me at bill@apexmotorsports.com, and I'll reply.

Posted by Bill/APEX Motorsports (Member # 636) on :

quote:
hey i need some new bolts do u ship? if so im really interested

Yes, I do ship via UPS! Send me an email at bill@apexmotorsports.com

Posted by Bill/APEX Motorsports (Member # 636) on :

quote:
Originally posted by SteedaGT:
What about the throttle body set up and pully for the 03 harley truck? also changing the lower crank pully to a 10 inch

While the pulleys shouldn't be a big deal, I'm not sure about the throttle body. Is it a straight-out-of-the-Lightning motor, or are there differences?
Also, with the pulley change, you'll definitely need chip tuning. I'm not sure if Autologic has released anything for the Harley trucks. I'll have to check for you...

Posted by SteedaGT (Member # 2805) on :

quote:
Originally posted by Bill/APEX Motorsports:

quote:
Originally posted by SteedaGT:
What about the throttle body set up and pully for the 03 harley truck? also changing the lower crank pully to a 10 inch
While the pulleys shouldn't be a big deal, I'm not sure about the throttle body. Is it a straight-out-of-the-Lightning motor, or are there differences?
Also, with the pulley change, you'll definitely need chip tuning. I'm not sure if Autologic has released anything for the Harley trucks. I'll have to check for you...

Any word on that chip?

Posted by Bill/APEX Motorsports (Member # 636) on :

quote:
Any word on that chip?

I'll need to know your computer code. If you get that for me, I can let you know if the software is available for your truck...

Posted by CobraSVT2001 (Member # 2309) on :

Bill, any way you guys are going to become a Spintech dealer? I love the exhaust system. I see a lot more people are stating to carry them but not too many in NorCal..

Posted by Bill/APEX Motorsports (Member # 636) on :

quote:
Originally posted by CobraSVT2001:
Bill, any way you guys are going to become a Spintech dealer? I love the exhaust system. I see a lot more people are stating to carry them but not too many in NorCal..

At this point, I don't have any plans to carry SpinTech, as we've had such great experiences with Bassani products. However, I never say never... [Smile]

Fueled by Ford Mustang Owners
on CaliforniaFords.com