This is topic MM CASTER CAMBER TOOL in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=030148

---

Posted by Fishtalelx91 (Member # 10703) on :
 
Anyone out there selling one
 

---

Posted by Martinna (Member # 12493) on :
 
Are you stuck trying to take the top strut nut off? Follow this guide ------ https://www.fordmuscle.com/archives/2002/02/castercamber/index2.php

Or is it a newer Mustang and you need the socket for the 1-7/8" nut attaching the hydroboost to the firewall mount? https://lmr.com/products/mustang-maximum-motorsports-caster-camber-plates-install-2015
 

---

Posted by Fishtalelx91 (Member # 10703) on :
 
Thanks for the reply brother everything’s is back on the car installed cc plates and needed the gauge tool to get proper caster camber and toe before I drive to the alignment shop
 

---

Posted by Martinna (Member # 12493) on :
 
I understand, it is this tool https://www.maximummotorsports.com/Camber-Gauge-P192.aspx I don't know who here has one. You can try posting this in the for sale section. Have you looked at other methods ---- https://www.hotrod.com/articles/hrdp-0411-wheel-alignment-guide/ ?
 

---

Posted by Fishtalelx91 (Member # 10703) on :
 
Thanks for your help have a buddy sending one out for me appreciate your hell! Maybe when can run em when my car is ready
 

---

Posted by S550_notch (Member # 11083) on :
 
Put it all in the center set you tires straight go to the alignment shop. Done this several times and never had issues.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com