This is topic T-5 problem in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029793
Posted by Billy Bob (Member # 9412) on :
 
I'm having trouble with my t5 going into gear. I change the clutch and the bearing retainer. But once I turn it on the car will not go into gear at all, if the car is off it goes into the gears very smooth. What could be the problem?
 
Posted by Martinna (Member # 12493) on :
 
Do you have an adjustable cable? Try tightening the cable so the clutch doesn't grab so close to the floor.
 
Posted by Billy Bob (Member # 9412) on :
 
quote:
Originally posted by Martinna:
Do you have an adjustable cable? Try tightening the cable so the clutch doesn't grab so close to the floor.
I will try that thanks
 
Posted by i (Member # 12534) on :
 
Did you put the clutch bearing on correctly that is attached with the clutch fork?
 
Posted by Billy Bob (Member # 9412) on :
 
quote:
Originally posted by i:
Did you put the clutch bearing on correctly that is attached with the clutch fork?
Yes that is on correctly
 
Posted by i (Member # 12534) on :
 
Can you elaborate more on why you can't shift? What happens when you hold down the clutch does it feel strong? Do you have a Short shifter equipped probably needs adjustment? Do you have an after market clutch quadrant or clutch cable that is adjustable that needs adjustment?
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com