This is topic 97 Camry start issues in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029692
Posted by 50Reasons (Member # 6452) on
:
I have this 97 Camry I and I'm having start issues. when the key is turned to acc position the starter engages and stays engaged until I shift to Reverse. if I shift to N the starter tries to engage again and stays engaged until I shift to D .. I've swapped Brendle switch and ignition switch and the neutral safety switch. I checked wiring near ignition never had any alarm nor does the wires look frayed .I've even checked wire in the trunk area where forums said to check, and I've checked wire loom under fuse and relay box under the hood. Does anybody know or can help with this issue and lead me in the right direction? Getting frustrated at this point and read to just install a start button lol
[ 2015-11-11, 01:51 PM: Message edited by: 50Reasons ]
Posted by hurting your feelings (Member # 13641) on
:
Did you replace the starter?
Posted by 50Reasons (Member # 6452) on
:
quote:
Originally posted by hurting your feelings:
Did you replace the starter?
No not yet I figured the starter is just doing what it's told to do but was actually thinking what if it was the starter solinoid on the starter going bad??? Idk yet
Posted by hurting your feelings (Member # 13641) on
:
Sounds like the starter is going out
Posted by 50Reasons (Member # 6452) on
:
Swapped starter and same issue
Posted by i (Member # 12534) on
:
Wires? Terminals?
Posted by 50Reasons (Member # 6452) on
:
quote:
Originally posted by i:
Wires? Terminals?
Looked at wiring harness terminals are good
Fueled by Ford Mustang Owners
on CaliforniaFords.com