This is topic gt40p heads install in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029593
Posted by gypsy88 (Member # 13891) on
:
Going to install some lightly ported gt40p heads on my 88 5.0 ho. Thinking about using my stock rockers off my current heads will that work?
Posted by 510.86.notch (Member # 9892) on
:
http://forums.corral.net/forums/5-0-5-8-engine-tech/1287806-gt40p-swap-e7-springs-rockers.html#/forumsite/20549/topics/1287806
Posted by gypsy88 (Member # 13891) on
:
So get uprated springs and I can use my stock e7 rockers until I put my cam in then upgrade.
Posted by gypsy88 (Member # 13891) on
:
So get upgrated springs and I can use my stock e7 rockers until I put my cam in then upgrade. quote:
Posted by 510.86.notch (Member # 9892) on
:
From what it say yes.but it's not recommended.you can find a set of rollers for pretty cheap.
Fueled by Ford Mustang Owners
on CaliforniaFords.com