This is topic Holley hp 125 on 68 mustang in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029405

---

Posted by 68StangTAY (Member # 11114) on :
 
Im just curious have anyone else used this pump on the car an if so how did you run the fuel line from the tank to the pump in lost since the stock setup takes the barbed end fuel filters an the Pump CALLS FOR MALE THREADED FUEL FILTERS
 

---

Posted by Secnd2nun64 (Member # 1431) on :
 
You just need to cut the line with a tube cutter, add a tube nut and flare the end. Just make sure you get the right flaring tool, 37 degree. Then just get whatever bulkheads you need. Here's an example when I did my return line for my EFI.

You could also get a threaded fitting to barb end and run rubber hose from the fitting to the fuel line with some hose clamps if you're going low psi still.

code:

---

---