This is topic Mounting Heat Exchanger on an SN95 in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029393
Posted by Autumnstang97 (Member # 6111) on
:
Looking for ideas to mount one. Has anyone here done it. Tried searching but no luck. I am not using the stock 03/04 Cobra HE brackets bc I don't have the cut outs on my bumper area.
Unless someone here can weld up some custom brackets I'd be interested.
Thanks.
Posted by RRRCobraSC281 (Member # 7086) on
:
why not just bolt some hangers off the front steel impact beam. Use nylock nuts so that they don't vibrate loose.
Posted by Autumnstang97 (Member # 6111) on
:
I had one set up but the bumper wouldn't clear. I will just try another method using the impact beam and share what I came up with. Thanks.
That rearend I picked up from you a while back hasn't been used yet either. It's bolted into the car already though lol
[ 2015-02-20, 01:27 AM: Message edited by: Autumnstang97 ]
Fueled by Ford Mustang Owners
on CaliforniaFords.com