This is topic AFR 185 RENEGADE HEADS in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029329

---

Posted by 5.0 CGS (Member # 9567) on :
 
I was wondering if anybody had used the afr 185 72cc on a stock 302.Is clearance an issue or am I good.Now if not good what's necessary for them to work. I have svo 1.7 rockers for them. I've done some research and some say it will work and others say they don't.

My future thoughts are a pro charger so just want to keep that in mind

Thanks for the response in advance.
 

---

Posted by NEIGHT (Member # 8741) on :
 
Depends on cam and how you degree it. 1.7's might be pushing it tho since I barely clear with 1.6's.
 

---

Posted by 1fastmach1 (Member # 10137) on :
 
It will work had the same heads on a stock 302 with f -303 and the 1.72 RR no problem
 

---

Posted by 5.0 CGS (Member # 9567) on :
 
Is there a recommended cam I should go for and what about intake. Right now I have a cobra intake but heard it will be to restricting on the heads.
 

---

Posted by 1fastmach1 (Member # 10137) on :
 
If u plan on going supercharged look at the Anderson b-31 or b-31hr
 

---

Posted by 4IDFOX (Member # 9921) on :
 
http://www.flowtechinduction.com/fti-custom-hydraulic-roller-camshaft-ford-billet/

He is a ford and afr guy. Custom cam is the only way to go
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com