This is topic E303 Cam install question???? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029254

---

Posted by 92Coupe916 (Member # 4031) on :
 
Has anyone ever installed a cam one tooth off and what were the symptoms??
 

---

Posted by diablounicorn (Member # 13033) on :
 
what problems are you having? did you install it lining up with the arrow on the crankshaft facing up?
 

---

Posted by 306calypsodrop (Member # 10881) on :
 
You need to line up the key ways on the timing chain
 

---

Posted by Stanced Stang (Member # 11891) on :
 
If you're installing a cam, there is no excuse for not properly degreeing it in. Lining it up "dot to dot" and expecting it to be correct can leave power on the table.

It seems, however, that you are in a whole other world of trouble...
 

---

Posted by rickm347 (Member # 5323) on :
 
You figure it out yet?
 

---

Posted by rickm347 (Member # 5323) on :
 
You figure it out yet?
 

---

Posted by SacGrown89GT (Member # 7435) on :
 
He found the problem. Had nothing to do with cam. After he did his 5spd swap he ddnt repin o2 harness so his car was runnin bad. Problem solved
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com