This is topic request...foxbody with sn95 3g alternator swap diagram in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029221

---

Posted by 90 7up lx (Member # 10304) on :
 
Any one have a schematic or wiring diagram for a sn95 alternator on a fox...all help is appreciated
Thanks ca fords
 

---

Posted by Tom Renzo (Member # 13165) on :
 
Here you go



A to the heavy charge lead
S to the S or center wire to lone spade
I to instrument charge lead. GEN light or switched key battery run start
SIMPLE AS PIE!!

[ 2014-10-08, 03:11 AM: Message edited by: Tom Renzo ]
 

---

Posted by MUSTTANGUY (Member # 2251) on :
 
The "D" shaped connector is the voltage regulator and will plug right into the 3G alternator.
The rectangular plug has 3 wires in it, the two larger black with orange stripes come together a few inches back in the harness and go to the battery side of the starter solenoid, this would go to the lug terminal on the back of the 3G. The other wire on the rectangular connector is white with black stripe, this wire goes to the single spade connector on the 3G. While you can cut the stock rectangular connector off original harness at the alternator and use the original black/orange stripe wires it is recommended that a larger gauge wire with fuse protection is used from 3G lug terminal to battery side of starter solenoid.
 

---

Posted by Blow_U_In_Reverse (Member # 12298) on :
 

quote:

---

Originally posted by Tom Renzo:
Here you go



A to the heavy charge lead
S to the S or center wire to lone spade
I to instrument charge lead. GEN light or switched key battery run start
SIMPLE AS PIE!!

---