This is topic MM A arms in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029211
Posted by El komander (Member # 10751) on :
 
Recently bought MM A arms and am not to sure if the ball joint is good to use on sn95 spindles ? Or just for fox I know it'll work but don't want to use the spacers method , installing them this weekend , just want to know if not to buy the correct ball joints before I get started thanks cafords
 
Posted by phildog (Member # 1214) on :
 
I believe that MM installs the Sn95 ball joints. I know for sure that my F6 spindles bolted down really nice onto the Fox-spec MM control arms.
 
Posted by El komander (Member # 10751) on :
 
Thanks for your input hope mine bolt up how I want them too thanks [patriot]
 
Posted by Greasy (Member # 5258) on :
 
They install the proper ball joint for SN-95 spindles.
 
Posted by MUSTTANGUY (Member # 2251) on :
 
The MM 79-93 control arms do indeed come with the SN95 style ball joints allowing your SN95 spindles to bolt right up.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com