This is topic HELP!! Sn95 a arms on fox! in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029175

---

Posted by 87sv5.0 (Member # 11488) on :
 
So I just bought a 90 gt but has sn95 a arms on it and it has a really bad camber stance "ricer" what can I do to correct the stance?
Also Can I use stock a arms and use the bump steer kit already installed?
Thanks!
 

---

Posted by El komander (Member # 10751) on :
 
Yeah the stock a arms will fix that
 

---

Posted by fordfiveoh (Member # 13107) on :
 
I've got sn95 arms on my fox and the angle isn't half bad at 2* camber


 

---

Posted by Blow_U_In_Reverse (Member # 12298) on :
 
do u have caster camber plates??
 

---

Posted by 4IDFOX (Member # 9921) on :
 
If you run sn95 spindles with the sn95 arms on a fox you should be ok but with fox spindles it is tough.

Sn95 spindles mean a 5 lug swap as in the picture above.

Some useless info for you also. In 87 they changed the width of the k member. The early ones are 1/2" narrower and the geometry is a little different. The 87 up being better geometry for handling.

[ 2014-09-05, 11:47 AM: Message edited by: 4IDFOX ]
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com