This is topic any 1 in the 209 know how to set up timing chains on a 4v??? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028985
Posted by 90 7up lx (Member # 10304) on
:
About to start assembling my 4v engine, and would like a lill help on seting up my timing....if any 1one in the 209 is knowledgeable and willing to help me out it would be great...lmk
209-947-3249
thanks
Posted by GR8WHITE281 (Member # 10372) on
:
Buy some beer and some hot wings and I'll help
Posted by JohnB (Member # 969) on
:
It's easier to have a pic for reference...
Posted by 90 7up lx (Member # 10304) on
:
Kool.....isnt their a special tool needed to hold the cams in place when setting up tge timing chains...
Posted by SacStangDriver (Member # 8304) on
:
Just have a friend hold them with 18mm wrench
Posted by SacStangDriver (Member # 8304) on
:
if you put the crank keyway at 9 oclock you are in safe mode. so if the cams turns 90 degrees you are ok. make sure you have the intake and exhaust cams dialed in first. then you can do the two long chains. pm me with any questions. i've done way to many mod motors.
[ 2014-05-14, 03:13 AM: Message edited by: SacStangDriver ]
Fueled by Ford Mustang Owners
on CaliforniaFords.com
