This is topic problem starting in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028979
Posted by 97blackGT (Member # 11764) on
:
So I recently changed my o/r h pipe back to the factory pipe on my 97 Gt.. I was having problems with the passenger side bolts taking them off I had to remove the starter I put everything back once done but now when I start the car it has Trouble starting.. like if the battery had died out but the battery is brand new an I went to autozone to have battery an alternator tested an came out fine
Posted by 70stang351w (Member # 9948) on
:
are the 02 sensors hooked up? any check engine light? need more info
[ 2014-05-07, 07:20 PM: Message edited by: 70stang351w ]
Posted by SLOW95GTS (Member # 10365) on
:
what kind of problems? like is the motor turning over? what does it do when you turn the key?
Posted by 97blackGT (Member # 11764) on
:
Their is no check engine light on so when I turn on the key ignition its like the car wants to die out so I give it a little gas an it helps out a little.. Iam starting to think its the starter maybe I didn't put it back in rite
Posted by 90GT510 (Member # 9199) on
:
Yea double check the starter. Putting stock pipe back on shouldn't have anything to do with ur car not starting properly
Posted by 90GT510 (Member # 9199) on
:
quote:
Originally posted by 90GT510:
Yea double check the starter. Maybe tap it with a lug wrench or rock car back and forth. I don't really see how u can do a starter install incorrectly not saying it's impossible tho I've seen some whacked out shit on cars before. Putting stock pipe back on shouldn't have anything to do with ur car not starting properly
Fueled by Ford Mustang Owners
on CaliforniaFords.com