This is topic Sn95 installation in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028922

---

Posted by Fivepoint_blues (Member # 13457) on :
 
I was just wondering what the steps to drop my 86 mustang 4 lug rear end and the steps and what will I need to buy to install a 97 sn95 rear end complete
 

---

Posted by Greasy (Member # 5258) on :
 
Are you asking how to remove the rear end? Are you going to run rear disc? Are you also running front 5 lug setup from the '97?
 

---

Posted by GTCONV86 (Member # 5385) on :
 
DON'T FOR GET THAT 97 REAREND IS JUST A LITTLE WIDER!!
 

---

Posted by 93lx4cyl (Member # 10517) on :
 
Need 93 cobra e brake cables. 95 brake booster & 93 cobra master cylinder.a new proportioning valve or gutted original. Should go sn95 front if not done already. Since rear end is wider will have to compensate for offset. If you want deep bdish usually you can get by with 05+ wheels in rear. Should do tubular a arms in back so you can remove the quad shocks since the rear end is out of the way
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com