This is topic Trickflow Trackheat vacuum tree in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028814
Posted by svtl1ghtn1ng (Member # 848) on
:
Hopefully this is easy. I have a 95 Mustang GT, with a Trickflow Trackheat upper and lower intake manifold. The manifold has a 3 spout vacuum tree behind and underneath pointed towards the firewall. I have plugged the open spouts with rubber caps in the past but within a couple months of driving they crack due to the heat. Anybody have any suggestions on how to plug these up legitimately so they dont leak and I dont have to always replace them. Any ideas would be appreciated.
Posted by CornOil_&_Boost (Member # 5888) on
:
im assuming you still have nipples coming off of them...
use pipe plugs in place.
Posted by svtl1ghtn1ng (Member # 848) on
:
What nipples are you referring to?
Posted by CornOil_&_Boost (Member # 5888) on
:
quote:
Originally posted by svtl1ghtn1ng:
What nipples are you referring to?
spouts youre talking about
Posted by Built88LX (Member # 10758) on
:
[ 2014-03-10, 04:34 PM: Message edited by: Built88LX ]
Fueled by Ford Mustang Owners
on CaliforniaFords.com