This is topic Help: Need cooling system hard lines for 5.0 in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028721

---

Posted by saleen428 (Member # 7535) on :
 
Looking for the hard lines that run on top of the lower intake manifold. These connect to the water pump and heater core. Mine rusted out and burst while I was in Sunnyvale. So looking for this in the Sunnyvale area. Thanks CAF!
 

---

Posted by red5o (Member # 12651) on :
 
Oh ok I got those but I'm way to far in Tracy area
 

---

Posted by saleen428 (Member # 7535) on :
 
Thanks man. Still looking for lines in Sunnyvale
 

---

Posted by Tom Renzo (Member # 13165) on :
 
What you can do is cut the hard line if it is ok at the fittings if there is enough left that is not rotted and use Heater hose from there back temporally or perminently.

[ 2014-01-22, 02:47 AM: Message edited by: Tom Renzo ]
 

---

Posted by saleen428 (Member # 7535) on :
 
Thanks Tom. That's my alternative. However its rusty so I prefer to replace it.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com