This is topic Holley systemax spacer? And looking to replace my clutch in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028464

---

Posted by 86xchpstang (Member # 11800) on :
 
So I have two questions?? I have a holley systemax 2 and it gets screaming hot!! So I bought a trick flow spacer 1". Is this going to help reduce my intake temp and by how much temp is it going to drop (roughly)? And am I going to notice any HP/TQ differences good or bad?

Also going to replace my clutch with???? I hear so much this and that but everyone seems to be a mechanic now a days!!! So I'm just wonder what clutch everyone on here recommends and if I should buy a lightened flywheel and how light should I go???

I have a 86 coupe with a 92 motor afr heads cam and holley intake. Injectors fuel pump long tube headers etc. it put down 300whp and 310wtq but I think I was kissing power BC of my clutch??
 

---

Posted by Marks93 (Member # 11130) on :
 
Not sure about the spacer but have read that it doesn't do much as far HP/Torque. Adding the 1" spacer may give you clearance issues unless you have a raised cowl hood.

I just changed my clutch to a Spec Stage 1. Works great and no issues yet. It's not too hard on the foot/leg when pressing the clutch in, kind of feels like the stock one.

[ 2013-10-10, 10:20 AM: Message edited by: Marks93 ]
 

---

Posted by 86xchpstang (Member # 11800) on :
 
Everyone seems to like spec clutches
 

---

Posted by Pure Stang (Member # 7251) on :
 
Hmmm I thought trick flow spacers have an off set? Instead of inline like holly.
 

---

Posted by 86xchpstang (Member # 11800) on :
 
Trick flow makes one for the holley systemax 2 as well
 

---

Posted by red5o (Member # 12651) on :
 
Center force clutch
 

---

Posted by *Als50* (Member # 6003) on :
 
Zoom stage 2,or Ram.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com